491889
24
Zoom out
Zoom in
Previous page
1/36
Next page
Listening to your system
05
24
En
05
Using the Sound Retriever
When audio data is removed during the compression
process, sound quality often suffers from an uneven sound
image. The Sound Retriever feature employs new DSP
technology that helps bring CD quality sound back to
compressed 2-channel audio by restoring sound pressure
and smoothing jagged artifacts left over after compression.
Press S.RTRV to switch the SOUND RTRV (Sound
Retriever) ON or OFF.
Note
• The Sound Retriever is only applicable to 2-channel
sources.
Setting the Up Mix function
In a 7.1-channel surround system with surround speakers
placed directly at the sides of the listening position, the
surround sound of 5.1-channel sources is heard from the
side. The Up Mix function mixes the sound of the surround
speakers with the surround back speakers so that the
surround sound is heard from diagonally to the rear as it
should be.
Using the Up Mix function is effective when the speakers
in the 7.1-channel surround system are set up as
recommended in the example on page 9.
• Depending on the positions of the speakers and the
sound source, in some cases it may not be possible to
achieve good results. In this case, set the setting to OFF.
1
Switch the receiver into standby.
2
Press and hold INPUT SELECTOR button on the front
panel for more than five seconds, and then press TUNER
button on the remote control.
UPMIX OFF appears and the Up Mix function turns off. If you
want to turn this function on, perform steps 1 and 2 again.
Note
•Set to ON regardless of this setting when playing DTS-HD
signals.
• May automatically be set to OFF even when set to ON,
depending on the input signal and listening mode.
Setting the Audio options
There are a number of additional sound settings you can
make using the TOOLS menu. The defaults, if not stated, are
listed in bold.
Important
Note that if a setting doesn’t appear in the TOOLS menu,
it is unavailable due to the current source, settings and
status of the receiver.
1
Press , then press TOOLS button.
2
Use
/
to select the setting you want to adjust.
Depending on the current status/mode of the receiver,
certain options may not be able to be selected. Check the
table below for notes on this.
3
Use
/
to set it as necessary.
See the table below for the options available for each setting.
4
Press RETURN to confirm and exit the menu.
iPod
USB
NETWORK
STANDBY/ON
AUTO
/
DIRECT
ALC /
ADAPTER
ECO
D AUX A AUX
S.RTRV
C
SW
L R
SL SR
SBL SBR SBL SBR
C
SW
L R
SL SR
UPMIX OFF UPMIX ON
Setting/What it does Option(s)
MIDNIGHT/LOUDNESS
The MIDNIGHT allows you to hear effective
surround sound of movies at low volumes.
The LOUDNESS is used to get good bass and
treble from music sources at low volumes.
MID/LDN OFF
MIDNIGHT
LOUDNESS
BASS
a
Adjust the bass level to accentuate or
minimize the bottom end.
–6 to +6
Default: 0
AUDIO DISP
iPod
CTRL
SO
UND
WING
DIMMER
TOP
MENU
MENU
TOOLS
VOL
RETURN
HOME MENU
STATUS
TV
PORTABLE
SLEEP SP-AB
ENTER
RECEIVER
RECEIVER
VSX-S300_SYXCN_En.book 24 ページ 2011年4月8日 金曜日 午後8時10分
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-S300-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-S300-S in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-S300-S

Pioneer VSX-S300-S Quick start guide - English, German - 32 pages

Pioneer VSX-S300-S User Manual - German - 36 pages

Pioneer VSX-S300-S Quick start guide - Dutch - 32 pages

Pioneer VSX-S300-S User Manual - Dutch - 36 pages

Pioneer VSX-S300-S Quick start guide - French, Italian, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info