491889
11
Zoom out
Zoom in
Previous page
1/36
Next page
Connecting your equipment
11
En
02
02
Bare wire connections
Front speaker terminals:
1
Twist exposed wire strands together.
2
Loosen terminal and insert exposed wire.
3
Tighten terminal.
Other speaker terminals:
1
Twist exposed wire strands together.
2
Push open the tabs and insert exposed wire.
3
Release the tabs.
CAUTION
• These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
connecting or disconnecting the speaker cables,
disconnect the power cord before touching any
uninsulated parts.
• Make sure that all the bare speaker wire is twisted
together and inserted fully into the speaker terminal. If
any of the bare speaker wire touches the back panel it
may cause the power to cut off as a safety measure.
Do not allow the speaker cable core to come into contact
with the receiver body.
-
If the speaker cable core comes into contact with any
metal portion of the receiver's body, it may damage the
speakers and cause smoke and fire.
Insert speaker cables securely into the terminals and
check that the cable does not come out of easily.
Connect the surround back or front height
speakers
Connect the PRE OUT SURR BACK/FRONT HEIGHT outputs
of the unit and additional amplifier to add a surround back or
front height speaker.
The Pre Out setting must be set if the above connections
are performed. Select Surr.Back if the surround back
speaker is connected and Height if the front height
speaker is connected (If neither the surround back
speaker nor the front height speaker is connected, either
setting will suffice) (see The Pre Out Setting on page 30).
You can use the additional amplifier on the surround back
channel pre-outs for a single speaker as well. In this case
plug the amplifier into the left (L (Single)) terminal only.
Switching the speaker terminal
Three speaker system settings are possible.
Use SP-AB button to select a speaker terminal setting.
Press repeatedly to choose a speaker terminal option:
SP:A ON – Sound is output from the speakers connected
to the A-speaker terminals and PRE OUT SURR BACK/
FRONT HEIGHT (multichannel playback is possible).
SP:B ON
– Sound is output from the two speakers connected
to the B-speaker terminals (only stereo playback is possible).
SP:A+B ON – Sound is output from the A-speaker
terminals, the two speakers in the B-speaker terminals,
and the subwoofer. Multichannel sources are downmixed
only when the STEREO or STEREO ALC mode is selected
for stereo output from A- and B-speaker terminals.
SP: OFFNo sound is output from the speakers.
Note
•Only SP:A ON and SP: OFF are available when the
Speaker System setting is set to Normal (see Speaker
System on page 27).
The subwoofer output depends on the settings you made
in Speaker Setting on page 28. However, if SP:B ON is
selected above, no sound is heard from the subwoofer
(the LFE channel is not downmixed).
All speaker terminals are switched off when headphones
are connected.
Making cable connections
Make sure not to bend the cables over the top of this unit (as
shown in the illustration). If this happens, the magnetic field
produced by the transformers in this unit may cause a
humming noise from the speakers.
Important
Before making or changing connections, switch off the
power and disconnect the power cord from the AC outlet.
Before unplugging the power cord, switch the power into
standby.
HDMI cables
Both video and sound signals can be transmitted
simultaneously with one cable. If connecting the player and the
TV via this receiver, for both connections, use HDMI cables.
12 3
10 mm
12 3
10 mm
HDMI
VSX-S300_SYXCN_En.book 11 ページ 2011年4月8日 金曜日 午後8時10分
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-S300-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-S300-S in the language / languages: English as an attachment in your email.

The manual is 2,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-S300-S

Pioneer VSX-S300-S Quick start guide - English, German - 32 pages

Pioneer VSX-S300-S User Manual - German - 36 pages

Pioneer VSX-S300-S Quick start guide - Dutch - 32 pages

Pioneer VSX-S300-S User Manual - Dutch - 36 pages

Pioneer VSX-S300-S Quick start guide - French, Italian, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info