574223
44
Zoom out
Zoom in
Previous page
1/71
Next page
Setting up the receiver
07
44
En
Cycle through the available choices
using
or
and choose a configuration
that matches your speaker setup.
One of the following configurations should
match your setup:
Surround back speaker setting
Default setting:
S
You must let the receiver know if surround
back speaker(s) have been connected, and
how big they are. The size you choose (large or
small) determines how much bass is sent
from the receiver to the speakers. If you have
connected a subwoofer to the surround back
terminals, you should select the surround
back subwoofer setting (
SB SW
) from the
options. Choose (asterisk) if no speaker is
connected.
Use
or
to select SB S, SB , SB SW
or SB L.
To select
SB L
, you must have
SL
selected
in the
Speaker setting
.
Subwoofer setting
You can choose whether the subwoofer is
used or not. Use the plus (
PLUS
) setting for
extra bass.
Use
or
to select the subwoofer
setting.
YES
– The LFE channel and bass frequen-
cies from the small (
S
) speakers are sent
to the subwoofer.
PLUS
– The LFE channel and bass
frequencies from all speakers are sent to
the subwoofer (
L
speakers will also output
bass).
NO
– No bass frequencies are sent to the
subwoofer.
If you chose the small front speaker
setting,
SW YES
is automatically set and
locked.
Crossover frequency setting
Default setting:
100 Hz
Crossover frequency is the point where the
receiver divides the high and low sounds (the
frequencies) between the speakers. Since
most smaller speakers can’t handle deep
bass tones, you can send these sounds to the
subwoofer (or if you don’t have a subwoofer,
the large (
L
) speakers in your system) instead
of the speakers set to small (
S
) in your setup.
Choose the point at which you want the
frequency routed to the subwoofer (or
L
speakers).
FL-CL-SL
FL-CL-SS
FL-CL-S
FL-CS-SL
FL-CS-SS
FS-C -SS
FS-CS-S
FS-CS-SS
FL-C -SS
FL-C -SL
FL-CS-S
FL-C -S
FS-C -S
SB S SB
SB SW
SB L
VSX_D912.book.fm 44 ページ 2003年12月5日 金曜日 午前9時43分
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D914 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D914 in the language / languages: English as an attachment in your email.

The manual is 3,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info