494398
53
Zoom out
Zoom in
Previous page
1/75
Next page
Setting up the receiver
06
53
En
English Italiano Français
Nederlands
EspañolDeutsch
5 Use
and
to adjust the delay for
each channel in turn, pressing ENTER to go
to the next channel when you’re done.
Listen to the reference channel and use it to
measure the target channel. Stand facing the
two speakers with your arms outstretched
pointing at each speaker. Try to make the two
tones sound as if they are arriving simulta-
neously at a position slightly in front of you
and between your arm span.
The test tone for channel delay is output in the
same order as step 5:
After you have completed all the channels in
your speaker setup, the volume level returns
to normal and
COMPLETE
, then
RESUME
shows in the display.
The MCACC indicator then lights to show that
MCACC setup is complete.
Using the MCACC system to set up your
speaker system will overwrite any
previous settings you had for the
STANDARD
or
ADVANCED SURROUND
modes.
Setting separate channel
levels for listening modes
Default setting:
0 dB
You can set relative channel levels from the
listening position using the method below
(this is similar to the VSX-D714/D814 MCACC
setup). Using
CH SELECT
(see tip below), it is
also possible to set separate channel levels
for each of the listening modes.
1 Press STANDARD or ADVANCED
SURROUND.
2 Press TEST TONE to output the test
tone.
The test tone is output in the following order
(depending on the speaker setting):
If you don’t hear a test tone from one of
your speakers, please refer to
Speaker
setting
on page 46 and
(VSX-D714/D814
only)
Surround back speaker setting
on
page 46 to make sure you have correctly
specified your speaker setup.
RC
RS
LS
SW SB
STANDARD
SURROUND
ADVANCED
LEVEL
TEST
TONE
MASTER
V OLUME
CH
SELECT
LC
RS
R
LS
SW SB
VSX_514-814.fm 53 ページ 2004年3月2日 火曜日 午後8時35分
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D714 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D714 in the language / languages: English as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info