455273
103
Zoom out
Zoom in
Previous page
1/132
Next page
Controlling the rest of your system
09
103
En/Ge
Ansteuerung Ihres restlichen Systems
When direct function is on, any component you
select (using the MULTI CONTROL buttons )
will be selected by both the receiver and the
remote control. When you turn direct function
off, you can operate the remote control without
affecting the receiver.
1 Press REMOTE SETUP and hold for three
seconds.
The LED lights steadily for two seconds.
2 Press the MULTI CONTROL button for
the component you want to control.
3 Use the number buttons to enter either
9990 (direct on) or 9995 (direct off).
The LED will light for two seconds to indicate
that its been correctly set. (If the LED blinks
three times, then there was a mistake with the
coderepeat steps 14.)
You cant use direct function for TV INPUT.
Confirming preset codes
Use this feature to check which preset code is
assigned to a MULTI CONTROL button.
1 Press REMOTE SETUP and hold for three
seconds.
The LED lights steadily for two seconds.
2 Press the MULTI CONTROL button of the
component for which you want to check the
preset code.
3 Press and hold ENTER for two seconds.
Each preset code consists of four digits, for
example 1329. Each digit will be represented by
a series of blinks on the remotes LED3 blinks
to represent the digit 3, etc. (0 is
represented by 10 blinks.)
Wenn die Direktfunktion eingeschaltet ist, wird
jede Komponente, die Sie wählen (mit den MULTI
CONTROL-Tasten) sowohl vom Receiver als auch
der Fernbedienung gewählt. Wenn Sie die
Direktfunktion ausschalten, können Sie die
Fernbedienung ohne Auswirkung auf den Receiver
bedienen.
1 Halten Sie REMOTE SETUP drei Sekunden
lang gedrückt.
Die LED-Anzeige leuchtet zwei Sekunden lang
anhaltend.
2Drücken Sie auf die MULTI CONTROL-Taste
für die Komponente, die Sie ansteuern
möchten.
3 Geben Sie mit den Zifferntasten entweder
9990 (eingeschaltete Direktfunktion) oder
9995 (ausgeschaltete Direktfunktion) ein.
Die LED-Anzeige leuchtet zwei Sekunden lang zur
Anzeige, dass die Einstellung korrekt durchgeführt
wurde. (Wenn die LED-Anzeige dreimal blinkt,
haben Sie bei der Eingabe des Codes einen Fehler
gemachtwiederholen Sie die Schritte 1-4)
Hinweis
Die Direktfunktion kann für TV INPUT nicht
verwendet werden.
Bestätigung
vorprogrammierter Codes
Überprüfen Sie mithilfe dieser Funktion, welcher
vorprogrammierte Code einer MULTI CONTROL-
Taste zugeordnet ist.
1 Halten Sie REMOTE SETUP drei Sekunden
lang gedrückt.
Die LED-Anzeige leuchtet zwei Sekunden lang
anhaltend.
2Drücken Sie auf die MULTI CONTROL-Taste
der Komponente, deren vorprogrammierten
Code Sie überprüfen möchten.
3 Halten Sie ENTER zwei Sekunden lang
gedrückt.
Jeder vorprogrammierte Code besteht aus vier
Ziffern, z. B. 1329. Jede Ziffer wird durch
mehrfaches Aufblinken der LED-Anzeige der
Fernbedienung dargestellt 3 x Aufblinken
repräsentiert die Ziffer 3, usw. (0 wird durch 10
x Aufblinken dargestellt)
XRE3059A_EnGe_096122 02.2.18, 3:20 PM103
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D711-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D711-K in the language / languages: English, German as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-D711-K

Pioneer VSX-D711-K User Manual - Dutch - 132 pages

Pioneer VSX-D711-K User Manual - French, Italian - 132 pages

Pioneer VSX-D711-K User Manual - Spanish - 132 pages

Pioneer VSX-D711-K User Manual - Finnish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info