455273
35
Zoom out
Zoom in
Previous page
1/132
Next page
Connecting up
03
35
En/Ge
Anschlüsse
Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker wire
touches the back panel it may cause the power
to cut off as a safety measure. Use good quality
speaker wire to connect the speakers to the
receiver.
When using the speaker on your TV as the
center speaker (C), connect the CENTER
PREOUT jack on this unit to the audio
input jack on your TV. In this case the
center speaker shown is unnecessary.
If you are using only one surround back
speaker, connect the positive wire to the
right channel (+) terminal, and the
negative wire to the left channel ()
terminal (see illustration on page 16).
If you select subwoofer (SB SUBWF) in the
Surround back speaker setting (see page
68) you can hook up a subwoofer instead
of speakers to the surround back speaker
terminals. Connect the positive wire to the
right channel (+) terminal, and the
negative wire to the left channel ()
terminal (see illustration on page 16).
Achtung
Achten Sie darauf, dass alle blanken
Litzendrähte verdrillt und vollständig in die
Lautsprecherklemme geschoben werden, Wenn
ein blanker Litzendraht mit der Rückplatte in
Berührung kommt, wird die Stromversorgung
möglicherweise als Sicherheitsmaßnahme
unterbrochen. Verwenden Sie Litzendrähte
guter Qualität, um die Lautsprecher an den
Receiver anzuschließen.
Hinweis
Wenn Sie den Lautsprecher Ihres TV-
Geräts als Center-Lautsprecher (C)
verwenden, verbinden Sie die CENTER
PREOUT-Buchse an diesem Gerät mit der
Audio-Eingangsbuchse an Ihrem TV-Gerät.
In diesem Fall ist der abgebildete Center-
Lautsprecher nicht notwendig.
Wenn Sie nur einen hinteren Surround-
Lautsprecher verwenden, verbinden Sie
den positiven Litzendraht mit der Klemme
des rechten Kanals (+) und den negativen
Litzendraht mit der Klemme des linken
Kanals () (siehe Abbildung auf seite 16).
Wenn Sie in der Einstellung der hinteren
Surround-Lautsprecher (siehe Seite 68)
Subwoofer (SB SUBWF) wählen, können
Sie anstelle von Lautsprechern einen
Subwoofer an die Anschlussklemmen der
hinteren Surround-Lautsprecher
anschließen. Verbinden Sie den positiven
Litzendraht mit der Klemme des rechten
Kanals (+) und den negativen Litzendraht
mit der Klemme des linken Kanals ()
(siehe Abbildung auf seite 16).
XRE3059A_EnGe_020040 02.2.18, 3:09 PM35
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D711-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D711-K in the language / languages: English, German as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-D711-K

Pioneer VSX-D711-K User Manual - Dutch - 132 pages

Pioneer VSX-D711-K User Manual - French, Italian - 132 pages

Pioneer VSX-D711-K User Manual - Spanish - 132 pages

Pioneer VSX-D711-K User Manual - Finnish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info