Manual Pioneer VSX-D710S (page 19 of 52) (English)

455271

Zoom out

Zoom in

1/52

Preparations

SURROUND speakers distance

setting mode

Use to set the SURROUND speakers distance. Like the

CENTER speaker position, the SURROUND speakers

may be set in a location closer or farther to your main

listening position than the FRONT speakers. Set the

distance of the SURROUND speakers accurately to hear

sounds coming from both FRONT and SURROUND

speakers at the same time.

Press % or ﬁ to set the distance of the

SURROUND speakers from the main

listening position (within a 30 foot range).

MEMO:

• The initial setting is 10 ft.

• When “S

” is selected in SPEAKERS setting mode,

the SURROUND distance cannot be set.

• One step equals about 1 ft.

SURROUND BACK speaker distance

setting mode (VSX-D810S/D850S

only)

Use to set the SURROUND back speaker distance. Like

the SURROUND speakers, the SURROUND BACK

speakers may be set in a location closer or farther to

your main listening position than the FRONT speakers.

Set the distance of the SURROUND speakers accurately

to hear sounds coming from both FRONT and

SURROUND speakers at the same time.

Press % or ﬁ to set the distance of the

SURROUND speakers from the main

listening position (within a 30 foot range).

MEMO:

• The initial setting is 10 ft.

• When “

” is selected in SPEAKERS setting mode,

the SURROUND BACK distance cannot be set.

• One step equals about 1 ft.

Dual mono setting

The dual mono setting can only be used when listening to

Dolby Digital discs that have dual mono software encoded

in them. As of now these are not that widely used. With

this setting you can choose which channel in the dual

mono setting you want to listen to. Thus, it is useful for

soundtracks that have one language on one channel and a

different language on the other. Remember you can only

use this setting if you have Dolby Digital software with this

feature and want to isolate one of the channels therein.

There are two different ways to route the sound in the dual

mono setting, one is with Dolby Digital mode on, the other

with Dolby Digital mode off. If Dolby Digital mode is

switched on, the ch1 setting will play channel 1 through

your center speaker. The ch2 setting will play channel 2

through your center speaker. With Dolby Digital mode off,

the dual mono sound routing is as follows: In the

ch1

setting your will hear channel 1 out of both front speakers.

In the ch2 setting you will hear channel 2 out of both

speakers. In the

L. c1 R. c2 setting the speakers will play

the soundtrack independently of each other. The left front

speaker will play channel 1 and the right front speaker will

play channel 2.

Press % or ﬁ to cycle through the possible

DUAL MONO settings.

ch1ch2

L. c 1 R. c 2

MEMO:

• The default setting of this feature is

ch1.

Dynamic range control setting mode

Dynamic range is the difference between the loudest and

softest sounds in any given signal. The dynamic range

control helps you play back sounds so the quieter sounds

are audible yet the louder sounds don’t get distorted. It

does this by compressing the dynamic range. When

watching a movie at low volume, setting this function

enables low level sounds to be heard more easily but you

won’t be jolted by louder sounds.

Press % or ﬁ to set the dynamic range control

(OFF, MAX, or MID).

MEMO:

• The initial setting is “OFF”.

• When the volume level is increased, set to OFF.

• For listening enjoyment at low volumes, set to “MAX”

for maximum dynamic range compression.

• Dynamic range control is effective only when a Dolby

Digital signal is being played back.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D710S in the language / languages: English as an attachment in your email.

The manual is 3,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-D710S

Pioneer VSX-D710S User Manual - English - 52 pages

Pioneer VSX-D710S User Manual - German - 52 pages

Pioneer VSX-D710S User Manual - Dutch - 108 pages

Pioneer VSX-D710S User Manual - French, Italian - 108 pages

Pioneer VSX-D710S User Manual - Portuguese, Swedish - 108 pages

Pioneer VSX-D710S User Manual - Spanish - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-D710S Manual

Product: