Manual Pioneer VSX-D710S (page 17 of 52) (English)

455271

Zoom out

Zoom in

1/52

Preparations

Crossover frequency setting mode

Crossover frequency is the point where the receiver

divides the high and low sounds (the frequencies)

between the speakers. Since most smaller speakers can’t

handle deep bass tones, this setting allows you to send

those sounds to the subwoofer (or speakers set to

“Large” if you don’t have a subwoofer) instead of the

speakers set to “Small” in your system. Choose the point

at which you want the frequency routed to the

subwoofer (or “Large” speakers).

We recommend setting this to 200 Hz if smaller

bookshelf-type speakers are used for your “Small”

speakers.

Press % or ﬁ to specify the crossover

frequency for your small speakers (100 Hz,

150 Hz or 200 Hz).

150Hz100Hz

200Hz

100 Hz

Sends bass frequencies below 100 Hz to the subwoofer

(or “Large” speakers).

150 Hz

Sends bass frequencies below 150 Hz to the subwoofer

(or “Large” speakers).

200 Hz

Sends bass frequencies below 200 Hz to the subwoofer

(or “Large” speakers).

MEMO:

• The initial setting is “100 Hz”.

• If all speakers (front, center, and surround) are set to

“Large” in SPEAKERS setting mode, crossover

frequency cannot be set because there are no “Small”

speakers (

***

appears in the display).

LFE attenuator setting mode

Dolby Digital and DTS surround sources include ultra-

low bass tones. Set the LFE attenuator as needed to

prevent the ultra-low bass tones from distorting the

sound from the speakers.

Press % or ﬁ to set the attenuation level (0

dB, 10 dB or

dB(∞)).

MEMO:

• The initial setting is “

0 dB”.

• When ∞ is selected (

appears in the display), LFE

is not available.

Low cut filter ON/OFF setting mode

Turn the low cut filter ON when distorted sound is

output through the subwoofer.

Press % or ﬁ to select low cut filter ON or

OFF.

MEMO:

• The initial setting is “

OFF”.

• If the subwoofer is set to “OFF” in the SUBWOOFER

ON/PLS/OFF setting mode, the low cut filter cannot

be set.

FRONT speakers distance setting mode

Sets the distance from the FRONT speakers to the

listening position.

Press % or ﬁ to set the distance of the

FRONT speakers from the main listening

position (within a 9.0 m range).

MEMO:

• The initial setting is 3.0 m.

• One step equals about 0.3 m.

CENTER speaker distance setting mode

Sets the distance from the CENTER speakers to the

listening position.

Press % or ﬁ to set the distance of the

CENTER speaker from the main listening

position (within a 9.0 m range).

MEMO:

• The initial setting is 3.0 m.

• When “

” is selected in SPEAKERS setting mode,

the Center distance cannot be set.

• One step equals about 0.3 m.

SUBWOOFER ON/PLS/OFF setting

mode

Sets whether the SUBWOOFER is used or not. Also, when

used you have the option to use the “PLS” setting.

Press % or ﬁ to select subwoofer ON, PLS or

OFF.

MEMO:

• The initial setting is “

ON”.

• Setting the front speaker size to “Small” in the

SPEAKERS setting mode automatically locks the

subwoofer in the “ON” position.

• Use the PLUS for extra bass. When you use PLS you

will get the bass sounds from the subwoofer even if

the front speakers are set to “Large”.

• If you select “OFF” in this setting you won’t be able

to select subwoofer in the surround back speaker

setting on previous page.

10 dB0 dB

∞ (display "

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D710S in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-D710S

Pioneer VSX-D710S User Manual - English - 52 pages

Pioneer VSX-D710S User Manual - German - 52 pages

Pioneer VSX-D710S User Manual - Dutch - 108 pages

Pioneer VSX-D710S User Manual - French, Italian - 108 pages

Pioneer VSX-D710S User Manual - Portuguese, Swedish - 108 pages

Pioneer VSX-D710S User Manual - Spanish - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-D710S Manual

Product: