574221
26
Zoom out
Zoom in
Previous page
1/84
Next page
26
Display
All the display information is explained and/or referenced here.
6 STEREO indicator
Lights when a STEREO mode is selected.
7 Source indicators
3 indicator lights the selected source.
8
TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
9
MASTER VOLUME indicator
Displays current volume level.
10
Sound control indicators
DNR – Lights when the digital NR is on.
LOUDNESS – Lights when the Loudness is on.
TONE – Lights when the Tone control is on.
MIDNIGHT – Lights when the Midnight mode
is on.
11
Tuner indicators
STEREO – Lights when a FM stereo broadcast
is received in the auto stereo mode.
TUNED – Lights when a broadcast is received.
MONO – Lights when the tuner is set to
receive FM broadcasts with the mono mode
selected.
12
H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both
turn off automatically).
13
Character display
Shows current mode, status, etc.
14
Analog level indicators
OVER – When the source signal is analog, this
lights if the signal is in danger of distorting.
Press INPUT ATT to lower the signal level.
ATT – Lights when ATT is used to reduce the
level of the analog source signal.
1 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
2 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
AUTO : Lights when the receiver is set to select
the input signal automatically.
ANALOG : Lights when analog signals are
assigned.
DIGITAL : Lights when digital audio signals are
selected.
3
Program Format indicator
2DIGITAL : Lights when a source with Dolby
Digital signals is played.
DTS : Lights when a source with DTS audio
signals is played.
For Dolby Digital or DTS sources, these
indicators change according to which channels
are active in the source.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel (mono).
RS – Right surround channel.
LFE – Low Frequency Effects channel.
4 2/dts mode indicators
2 DIGITAL – Indicates multi channel playback
of a Dolby Digital source.
2 PRO LOGIC – Lights when Dolby Pro Logic
decoding is switched on.
dts : When the 2/dts mode on the receiver is
on, this indicator lights to indicate playback of a
DTS signal.
5 DSP indicator (See p.40–41)
Light when a DSP or Advanced Theater mode
is selected.
Displays & Controls
12 3 4 56 7 8
91011121314
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D709S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D709S in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info