574221
20
Zoom out
Zoom in
Previous page
1/84
Next page
20
Connecting Your Equipment
Placing Your Speakers
Proper speaker placement is essential to realize the best sound from your system. The diagram and tips given
here are just a rough guide; be sure to read the instructions that come with your speakers.
Install the left and right front speakers at equal distances from the TV.
When installing speakers near the TV, we recommend using magnetically shielded speakers to prevent
possible interference such as distortion in the color of the TV screen. If you do not have magnetically
shielded speakers and notice discoloration of the TV screen, place the speakers farther away from the TV.
Install the center speaker above or below the TV so that the sound of the center channel is localized at
the TV screen.
CAUTION:
When installing the center speaker on top of the TV, be sure to secure it with tape or some other suitable means.
Otherwise, the speaker may fall from the TV due to external shocks such as earthquakes, and it may lead to endanger-
ing those nearby or damaging the speaker.
If possible, install the surround speakers slightly above ear level.
It may be difficult to obtain a cohesive surround effect if the surround speakers are installed farther
away from the listening position than the front and center speakers.
Speaker placement
If you have a multiple speaker arrangement the placement of the speakers is extremely important. To achieve the best
possible surround sound, install your speakers as shown below. Make sure all speakers are installed securely to prevent
accidents and improve sound quality. Be sure to consult your speaker manuals for the best placement of the speakers. Some
speakers are designed to be floor-standing but others benefit greatly from speakers stands which raise them off the floor.
memo
Speaker impedance
You can change the speaker impedance for
VSX-D709S
but we recommend using speakers with an impedance
of 8-16 (the default setting). If you are using 6- less than 8 impedance speakers, you need to change the
impedance setting. Use any speaker rated between 6-16.
First turn the receiver off, then press the power button while
holding down the SPEAKERS button.
The receiver will reset to the new impedance setting. To choose
a new impedance setting repeat the process above. You can
choose the 8-16 setting or the 6-8 setting.
To check which impedance setting to
hold down the SPEAKERS button for
2-3 seconds. You'll get a display like
these telling you the speaker
impedance setting.
(This display indicates a 6-
less than 8 impedance
setting.)
(This display indicates an 8-
16 impedance setting.)
memo
VSX-D709S
SPEAKERS
STANDBY/ON
Surround
Left
Surround
Right
Listening
Position
Front
Left
Front
RightCenter
Sub
Woofer
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D709S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D709S in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info