574221
12
Zoom out
Zoom in
Previous page
1/84
Next page
12
Cassette deck placement
Depending on where the cassette deck is placed,
noise may occur during playback of your cassette
deck which is caused by leakage flux from the
transformer in the receiver. If you experience noise,
move the cassette deck farther away from the
receiver.
7 Analog audio/video cords
Use audio/video cords (not supplied) to make
analog audio and video connections.
Connect red plugs to R (right)
and white plugs to L (left).
Be sure to insert completely.
Audio Components
To begin set up connect your audio components to the jacks as shown below. These are all analog
connections and your analog audio components (cassette deck) use these jacks. Remember that for
components you want to record with you need to hook up four plugs (a set of stereo ins and a set of
stereo outs), but for components that only play you only need to hook up one set of stereo plugs (two
plugs). To use DTS or Dolby Digital surround sound features you must hook up your digital components to
the digital inputs (see p. 13). We also recommend hooking up your digital components to analog audio
jacks. If you want to record to/from digital components (like a CD-R) to/from analog components you must
hook up your digital equipment with these analog connections. See p.13 & 14 for more on digital
connections.
Before making or changing the connections, switch off the power and disconnect the power cord from
the AC wall outlet.
*The arrows indicate the direction of the audio signal.
Connecting Your Equipment
CD player
OUTPUT
L
R
ANALOG
OUTPUT
(PLAY)
L
R
INPUT
(REC)
L
R
ANALOG
OUTPUT
(PLAY)
L
R
INPUT
(REC)
L
R
ANALOG
Recorder 1
(CD-R/TAPE1/MD etc)
Recorder 2
(CD-R/TAPE1/MD etc)
L
R
7 Coaxial cords/Optical cables
Commercially available digital audio coaxial
cords (standard video cords can also be
used) or optical cables (not supplied) are
used to connect digital components to this
receiver.
When you use optical digital input or output
terminals, pull off the caps and insert the
plugs. Be sure to insert completely.
Coaxial cord
(or standard video cord)
Optical cable
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D709S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D709S in the language / languages: English as an attachment in your email.

The manual is 7,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info