574213
35
Zoom out
Zoom in
Previous page
1/60
Next page
Setting up the receiver
06
35
En
Choosing your receiver setup
Even though you may already have your system
up and running after using the 5 minute guide
on pages 8 to 12, you should also be sure to
complete the following set up operations to
ensure the best possible surround sound. This
is particularly important when using Dolby
surround. You only need to make these settings
once (unless you change the placement of your
current speaker system or add new speakers,
etc.). Refer to the following pages for details on
each of the settings.
If you are using the Pioneer S-FCRW230
speaker system, you’ll have to set the
Crossover frequency to 200 Hz. You can leave
the Speaker setting and the Subwoofer
setting in the default settings.
RECEIVER
RECEI-
VER
ENTER
RECEIVER
ENTER
RECEIVER
1 Press RECEIVER to turn the power on.
The STANDBY indicator goes out.
2 Press RECEIVER.
3 Use } or ] to choose the option you
want to adjust.
It will be easiest to adjust each of the settings in
turn, following the order below (and on the
following pages). The current setting is shown
for each option as you cycle through the
display.
Speaker setting (page 36)
Specify the number and type of speakers you
have connected.
Subwoofer setting (page 36)
Specify how the subwoofer is used.
Crossover frequency setting (page 36)
Determine which frequencies will be sent to the
subwoofer (or large speakers).
LFE attenuator setting (page 37)
Specify the peak level for the LFE channel.
Front speaker distance setting (page 37)
Specify the distance from your listening
position to your front speakers.
Center speaker distance setting (page 37)
Specify the distance from your listening
position to your center speaker.
Surround speaker distance setting (page 37)
Specify the distance from your listening
position to your surround speakers.
Dynamic range control setting (page 38)
Compress the dynamic range of the sound
track.
Dual mono setting (page 38)
Isolate one channel when listening to discs with
dual mono encoding.
Coaxial digital input setting (page 38)
Specify the component to be assigned to the
coaxial digital input.
Optical digital input setting (page 38)
Specify the component to be assigned to the
optical digital input.
VSX-D412 VSX-D512
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D512 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D512 in the language / languages: English as an attachment in your email.

The manual is 3,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info