574211
25
Zoom out
Zoom in
Previous page
1/44
Next page
Playing sources
05
25
En
Expanded
This mode is especially designed to give sound
depth to stereo sources. The overall effect
builds a dynamic and broad sound space,
allowing two-channel (stereo) signals to imitate
a five speaker sound. Use with Dolby Pro Logic
for a stereo surround effect. You can also use
with Dolby Digital sources for a wider stereo
field than the Standard modes.
5-Channel Stereo
This can be selected to give multi-channel
sound to a stereo source, using all the speakers
in your setup.
Choosing the input signal
You need to hook up a component to both
analog and digital inputs on the back of the
receiver to select between input signals.
DOWN
S
TEREO/
DIRECT
SIGNAL
SELECT
UP
ENTER
INPUT
SELECTOR
MASTER VOLUME
MULTI JOG
AUDIO/VIDEO MULTI-CHANNEL RECEIVER
R
MONITOR
MULTI JOG
MIDNIGHT LOUDNESS TONE QUICK SETUP
N∫m-Û.,,
Press SIGNAL SELECT (front panel) to
select the input signal corresponding to the
source component.
Each press switches between AUTO, DVD 5.1
ch, ANALOG and DIGITAL. The default is
AUTO.
When set to DIGITAL, 2 DIGITAL lights when
a Dolby Digital signal is input, and DTS lights
when a DTS signal is input.
DVD 5.1 ch is only available when DVD/LD
is selected as the source.
This receiver can only play back Dolby
Digital, PCM (32kHz, 44kHz, 48kHz, and 96
kHz) and DTS digital signal formats. With
other digital signal formats, set to
ANALOG.
You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 12) and
set the signal input to DIGITAL.
Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your DVD
player.
You can only select DIGITAL if the source
you selected is assigned to a digital input.
See page 32 for more on the digital input
settings.
Using Stereo/Direct
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo. See the previous page for
more on these modes.
Press STEREO (STEREO/DIRECT on the
front panel) repeatedly to switch between
the two options.
If you switch on Midnight listening, Loud-
ness, or the Tone controls when DIRECT is
selected, the receiver automatically
switches to STEREO.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D511 in the language / languages: English as an attachment in your email.

The manual is 2,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info