455266
11
Zoom out
Zoom in
Previous page
1/40
Next page
11
En
04
Preparations
1 Press RECEIVER to turn the power on.
The STANDBY indicator goes out.
2 Press RECEIVER.
This switches the remote to the receiver mode.
3 Press @ or # to select the mode you want to
set.
For best results, start with “SPEAKERS setting mode”
and make your initial adjustments in the order
described below.
The current settings are displayed automatically.
SPEAKERS (Front, Center, Surround) setting
mode (page 12)
Use to specify the number and type of speakers you
have connected.
SUBWOOFER ON/PLUS/OFF setting mode (page
12)
Use to specify the subwoofer as on, plus or off.
Setting Up for Surround Sound
Switch the power of this unit on (The STANDBY
indicator goes out).
To ensure the best possible surround sound, be sure to
complete the following set up operations. This is
particularly important when using the 2 (Dolby)
surround mode. You only need to make these settings
once (unless you change the placement of your current
speaker system or add new speakers, etc.). Refer to the
following pages for detailed descriptions of the settings
available for each mode.
MULTI CONTROL
DVD/LD TV/SAT VCR/DVR CD
LOUDNESS FUNCTION MUTING
RECEIVER
D.ACCESS
AT T
VOL
MENU
TOP
MENU
VOL
CH
2
DSP MODE
MIDNIGHT
5.1CH
CD-R/
TAPE/MD
CHANNEL
SELECT
CHANNEL
LEVEL
EFFECT
ENTER
FQ
FQ
ST ST
FL
DIMMER
REMOTE
SETUP
MASTER
VOLUME
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
TV CONTROL
FUNC
SIGNAL
SELECT
TEST
TONE
RECEIVER
TUNER
TV CONT
Î
12 34
56 78
90
SOURCE CLASS MPX BAND
10 DISC
CHANNEL
DISPLAY
RF ATT
3
4
1
2
Crossover frequency setting mode (page 12)
Use to determine which frequencies will be sent to
the subwoofer (or “Large” speakers if you don’t have a
subwoofer).
LFE attenuator setting mode (page 13)
Use to specify the peak level for the LFE channel and
the crossover network for rerouted bass frequencies.
Low cut filter ON/OFF setting mode (page 13)
Use to cut the distorted sound from the subwoofer.
FRONT speakers distance setting mode (page 13)
Use to specify the distance from your listening
position to your front speakers.
CENTER speakers distance setting mode (page
13)
Use to specify the distance from your listening
position to your center speaker.
SURROUND speakers distance setting mode
(page 14)
Use to specify the distance from your listening
position to your surround speakers.
Dynamic range control setting mode (page 14)
Use to compress the dynamic range of the sound
track.
Dual mono setting mode (page 14)
Use with 2 Digital software that has dual mono
encoding if you want to isolate one channel or listen
in this specialized mono mode.
Coaxial digital input setting (page 14)
Use to specify the component to be assigned to the
coaxial digital input.
Optical digital input setting 1 (page 15)
Use to specify the component to be assigned to the
optical digital input.
Optical digital input setting 2 (page 15)
Use to specify the component to be assigned to the
optical digital input.
4 Press % or to select the setting you want.
The setting is entered automatically.
5 Repeat steps 3 and 4 to set other surround
modes.
MEMO:
Press
ENTER to exit the setting mode.
The setting mode is automatically exited if no operation
is performed within 20 seconds.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D510 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-D510

Pioneer VSX-D510 User Manual - English - 72 pages

Pioneer VSX-D510 User Manual - German - 40 pages

Pioneer VSX-D510 User Manual - Dutch - 80 pages

Pioneer VSX-D510 User Manual - French, Italian - 80 pages

Pioneer VSX-D510 User Manual - Portuguese, Swedish - 80 pages

Pioneer VSX-D510 User Manual - Spanish - 80 pages

Pioneer VSX-D510 User Manual - Spanish - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info