574215
45
Zoom out
Zoom in
Previous page
1/48
Next page
45
<ARB7192>
Additional Information
Symptom
Broadcast stations cannot be selected
automatically.
No sound from surround or center
speakers.
Sound is produced from other
components, but not from LD or DVD
player.
Cannot be remote controlled.
The display is dark.
Cause
Weak radio signals.
Speaker settings are incorrect.
The rear and/or center levels are
turned down.
The surround and/or center
speakers are disconnected.
SIGNAL SELECT is set incorrectly.
The digital inputs are assigned
incorrectly, or not at all.
The remote control batteries have
worn out.
Too far away or bad angle of
operation.
There is an obstacle between the
receiver and the remote control.
Strong light such as fluorescent
light is shining onto the unit's
remote control signal light-
receiving window.
A cord is connected to the
CONTROL IN terminal on this unit.
This is not a malfunction.
Remedy
Connect an outdoor antenna (refer
to page 8).
Refer to “SPEAKER setting mode”
on page 16 to check the speaker
settings.
Refer to “Adjusting the speaker
volume” on page 20 to check the
speaker levels.
Connect the speakers (refer to
page 13).
Set SIGNAL SELECT to "DIGITAL" or
"ANAROG" according to the type of
connections made. (refer to page 26)
Set the digital input setting
correctly (refer to page 15, 19).
Replace the batteries (refer to page 6).
Operate within 23 feet (7 m), 30° of
the remote sensor on the front
panel (refer to page 7).
Remove the obstacle or operate
from another position.
Avoid exposing the remote sensor
on the front panel to direct light.
Connect cord to the correct jack.
In standby, pressing
STANDBY/
ON while holding down the
button (both on the front panel)
returns the display to the default
brightness.
If the unit does not operate normally due to external effects such as static electricity
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D498 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D498 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info