574215
24
Zoom out
Zoom in
Previous page
1/48
Next page
24
<ARB7192>
Names of Parts and Basic Operations
! SIGNAL SELECT button
Use to select input signals for the digital components.
First press DVD/LD, TV/SAT, MD/TAPE 1, CD or VCR
(& Function buttons) to select the component, then
press SIGNAL SELECT repeatedly to select one of the
following:
ANALOG : Selects the analog (R and L) audio signals.
DIGITAL : Selects the digital audio signals. This
receiver automatically detects and displays the
format of the signal being input. AC-3 lights when
Dolby Digital signals are input. (Dolby Digital
decoding is switched automatically.)
SIGNAL SELECT is fixed in the “ANALOG” position
for components not assigned to one of the three
digital input jacks.
Because the audio from a karaoke microphone and
LD recorded with analog audio only is not output
from the digital output, set SIGNAL SELECT to
“ANALOG”.
This receiver can only play back Dolby Digital, PCM
(32kHz, 44kHz, and 48kHz),digital signal formats.
With digital signal formats other than these, set
SIGNAL SELECT to “ANALOG”.
@ DSP MODE button
Press repeatedly to select a DSP sound mode (HALL 1,
HALL 2, JAZZ, DANCE, THEATER 1, or THEATER 2).
Use these modes to produce surround sound from
standard (two channel) stereo sources.
# MIDNIGHT button
Press to hear effective surround sound at low volume
levels. The effect is automatically adjusted according
to the volume level.
$ MASTER VOLUME
After turning on the desired component, rotate to
adjust the volume.
% PHONES jack
Connect headphones for private listening (the
speakers turn off automatically).
^ STATION/FREQUENCY (+/) button
STATION: Press to select the preset channel.
FREQUENCY: Press to select the frequency.
& Function buttons
Selects the function. Each press switches the DVD/LD
input between DVD/LD and DVD 5.1 channel.
* TAPE 2 MONITOR button
Switches the TAPE 2 monitor on or off (refer to page 36).
( DIRECT button
Switches direct playback on or off. Use to bypass the
receiver’s tone control circuitry or level control for
higher fidelity to the program source. When DIRECT
is ON, Dolby, DSP, LOUDNESS and MIDNIGHT mode
are automatically turned OFF.
) VIDEO INPUT jacks
Connect a video camera, video game system, etc. to
the VIDEO INPUT jacks (refer to page 10).
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D498 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D498 in the language / languages: English as an attachment in your email.

The manual is 1,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info