574207
42
Zoom out
Zoom in
Previous page
1/48
Next page
42
Additional Information
Symptom
Broadcast stations
cannot be selected
automatically.
No sound from
surround or center
speakers.
Sound is produced
from other
components, but not
from LD or DVD
player.
No sound is output or
a noise is output when
software with DTS is
played back.
When a search is
performed by a DTS
compatible CD player
during playback, noise
is output.
Cannot be remote
controlled.
The display is dark or
off.
Cause
Weak radio signal.
Speaker settings are incorrect.
The rear and/or center levels are
turned down.
The surround and/or center speakers
are disconnected.
SIGNAL SELECT is set incorrectly.
The digital inputs are assigned
incorrectly, or not at all.
SIGNAL SELECT is set to “ANALOG”.
A DVD player not compatible with
DTS is used, or the setting of DVD
player is incorrect.
The digital output level is adjusted on
a CD player or other component
equipped with digital output level
adjustment capability. (The DTS
signal has been altered by the player,
and cannot be read.)
The search function performed by the
player slightly alters the digital
information, making it unreadable.
The remote control batteries have
worn out.
Too far away or bad angle of
operation.
There is an obstacle between the
receiver and the remote control.
Strong light such as fluorescent light
is shining onto the unit's remote
control signal light-receiving
window.
The FL DIMMER button is pushed.
Remedy
Connect an outdoor antenna (refer to
page 8).
Refer to “SPEAKER setting mode” on
page 15 to check the speaker
settings.
Refer to “Setting the volume level of
each channel” on page 19 to check
the speaker levels.
Connect the speakers (refer to page
12).
Set SIGNAL SELECT to “DIGITAL” or
“ANALOG” according to the type of
connections made. (refer to page 28).
Set the digital input settings correctly
(refer to page 18-19).
Make digital connections (refer to
page 11) and set SIGNAL SELECT to
“DIGITAL” (refer to page 28).
Refer to the instruction manual
supplied with the DVD player.
Set the digital volume level of the
player to full, or to the neutral
position.
This is not a malfunction, but be sure
to turn the volume down to prevent
the output of loud noise from your
speakers.
Replace the batteries (refer to page 7).
Operate within 23 feet ( 7 m), 30° of
the remote sensor on the front panel
(refer to page 7).
Remove the obstacle or operate from
another position.
Avoid exposing the remote sensor on
the front panel to direct light.
Press FL DIMMER on the remote
control repeatedly to return to the
default.
If the unit does not operate normally due to external effects such as static electricity
Disconnect the power plug from the outlet and insert again to return to normal operating conditions.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D309 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D309 in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info