574204
30
Zoom out
Zoom in
Previous page
1/32
Next page
30
Troubleshooting
Incorrect operation is often mistaken for trouble and malfunctions. If you think that there is something wrong with this
component, check the points below. Sometimes the trouble may lie in another component. Investigate the other
components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks
listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
Additional Information
Cause
The power plug is disconnected.
The protection circuit may have
activated.
Static electricity caused by dry
air.
Improper connections.
Sound is muted.
The volume is turned down.
Speakers are turned off.
Monitor is on.
Improper connections.
The input source is not properly
selected.
Incorrect frequency.
The antenna is not connected.
FM broadcasts
The FM antenna is not fully
extended or poorly positioned.
Weak radio signal.
AM broadcasts
The AM antenna is poorly
positioned.
Weak radio signal.
Interference cause by other
equipment (fluorescent lamp,
motor, etc.).
Weak radio signal.
Incorrect center mode.
The surround and/or center levels
are turned down.
• The surround and/or center
speakers are disconnected.
Remedy
Connect the power plug to the
wall outlet.
Disconnect the power plug from
the outlet, and insert again.
Disconnect the power plug from
the outlet, and insert again.
Make sure the component is
connected correctly (see pages
8 through 11).
Press MUTING on the remote
control.
Adjust MASTER VOLUME.
Press SPEAKERS to switch on the
speakers.
Press the MONITOR button.
Make sure the component is
connected correctly (see pages
8 through 11).
Press the correct function button.
Tune in the correct frequency.
Connect the antenna (see page 8).
Fully extend the FM wire
antenna, position for best
reception, and secure to a wall.
Connect an outdoor FM antenna.
(see page 8).
Adjust the direction and position
for best reception.
Connect an additional internal or
external AM antenna (see page 8).
Turn off the equipment causing
the noise or move it away from
the receiver.
Place the antenna farther away
from the equipment causing the
noise.
Connect an outdoor antenna
(see page 8).
Set the correct center mode
according to the speakers in
your system (see page 13).
See Setting Volume Levels on
page 15-16 to check the speaker
levels.
Connect the speakers (see pages
11-12).
Symptom
The power does not turn on.
The unit does not respond when the
buttons are pressed.
No sound is output when a function
is set.
No image is output when a function
is set.
Considerable noise in radio
broadcasts
Broadcast stations cannot be se-
lected automatically.
No sound from surround or center
speakers.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-D209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-D209 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info