455263

Pioneer VSX-C301 Manual

32
Zoom out
Zoom in
Previous page
1/44
Next page
The System Setup menu
09
32
En
• Depending on the source and other receiver
settings, you may not always hear sound from the
subwoofer.
LFE attenuator setting
Dolby Digital and DTS audio sources include ultra-low
bass tones. Set the LFE attenuator as needed to prevent
the ultra-low bass from distorting the sound.
•
LFEATT 0
– The LFE channel is played with no
attenuation
•
LFEATT10
– LFE channel is attenuated by 10dB
•
LFE OFF
– LFE channel is not played
Front speaker distance setting
Specifies the distance from your listening position to the
front speakers:
•
Fch 0.1 m.
–
Fch 9.0 m.
– Distance can be set in
increments of 0.1 m. The default is 2.0 m.
Center speaker distance setting
Specifies the distance from your listening position to the
center speaker:
•
Cch 0.1 m.
–
Cch 9.0 m.
– Distance can be set in
increments of 0.1 m. The default is 2.0 m.
Surround speaker distance setting
Specifies the distance from your listening position to the
surround speakers:
•
Sch 0.1 m.
–
Sch 9.0 m.
– Distance can be set in
increments of 0.1 m. The default is 2.0 m.
Dynamic Range Control
Specifies the amount of dynamic range adjustment to
Dolby Digital soundtracks:
•
DRC OFF
– No dynamic range adjustment (use when
listening at higher volume)
•
DRC MAX
– Dynamic range is reduced (loud sounds
are reduced in volume while quieter sounds are
increased)
•
DRC MID
– Mid setting
• This setting works only with Dolby Digital
soundtracks. For other sources you can create a
similar effect using the Midnight mode (see
Using
the Sound Modes
on page 24).
Dual mono setting
Specifies how dual mono encoded Dolby Digital
soundtracks should be played:
•
ch1
– Only channel 1 is played
•
ch2
– Only channel 2 is played
•
L. c1 R. c2
– Both channels are played through the
front speakers
• On the
ch1
and
ch2
settings the sound comes only
from the center speaker (or from the front speakers if
CENTER ––
was selected for the center speaker
setting.
• This setting works only with dual mono encoded
Dolby Digital soundtracks. See the disc packaging
for channel information.
Input attenuator setting
When playing analog sources, if the sound is distorting
(or when you see the
OVER
indicator light in the display),
switch on the input attenuator. Each input has its own
attenuator setting; set it for the currently selected input.
•
IN. ATT OFF
– Input attenuator is off
•
IN. ATT ON
– Input attenuator is on
Coaxial input setting
Specifies which receiver function the coaxial input
(
DVD(STB) COAX
jack) relates to:
•
COAX DVD
– Assigns the input to the receiver’s
DVD
function
•
COAX STB
– Assigns the input to the receiver’s
STB
function (the optical input is automatically set to
DVD
)
• See also
Connecting your equipment
on page 8.
Optical input setting
Specifies which receiver function the optical input
(
STB(DVD) OPT1
jack) relates to:
•
OPT1 STB
– Assigns the input to the receiver’s
STB
function
•
OPT1 DVD
– Assigns the input to the receiver’s
DVD
function (the coaxial input is automatically set to
STB
)
• See also
Connecting your equipment
on page 8.
• You cannot assign the other optical input (
DVR/TV
OPT2
jack).
vsx-c301.book 32 ページ ２００３年２月６日　木曜日　午後５時４分
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-C301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-C301 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-C301

Pioneer VSX-C301 User Manual - German - 44 pages

Pioneer VSX-C301 User Manual - Dutch - 88 pages

Pioneer VSX-C301 User Manual - French, Italian - 88 pages

Pioneer VSX-C301 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info