455263
9
Zoom out
Zoom in
Previous page
1/44
Next page
Connecting your equipment
03
9
En
English
DVD(STB) COAX jack (page 10)
Coaxial digital audio jack for the DVD input
(although it is possible to reassign it to the STB
input).
7 SCART AV connectors
The four SCART-type AV connectors carry video and
analog audio.
VIDEO IN/OUT AV connector (page 12)
AV connector for the VIDEO input. When the
receiver is set to any other input, that signal is output
from the VIDEO IN/OUT AV connector.
DVR/TV IN/OUT AV connector (page 10)
AV connector for the DVR/TV input. When the
receiver is set to any other input, that signal is output
from the DVR/TV IN/OUT AV connector.
DVD IN AV connector (page 10)
AV connector for the DVD input.
STB IN AV connector (page 11)
AV connector for the STB input.
The table below shows the input and output video
formats available for each AV connector.
All AV connectors also have audio in. The
VIDEO and
DVR/TV connectors also have audio out.
The VIDEO and DVR/TV connectors are compatible
with i/o-Link.A, T-V Link, Easy Link, MegaLogic,
SMARTLINK, Q-Link, DATALOGIC, NextTView Link, etc.
The AV Direct mode
The AV Direct mode allows the receiver to pass audio/
video signals arriving at one of the AV connector inputs
to the AV connector outputs without the sound being
output through the speakers connected to the receiver.
This allows you to operate your other components as if
they were connected directly to each other without the
receiver being on. One use for this is if you want to record
from your satellite receiver to your VCR (both connected
to this receiver) without the receiver being switched on.
You could also use the AV Direct mode to watch a video,
using your TV’s speakers for the audio, without switching
on the receiver.
You can switch into AV Direct mode (from either standby
or on) using the AV DIRECT button on the remote
control. However, it’s also possible to set the receiver to
switch the AV Direct function on automatically when an
incoming signal is detected. See also AV Direct setting on
page 33.
The diagram below shows how the AV DIRECT and the
STANDBY/ON buttons switch the receiver between
standby, AV Direct mode, and on.
Installing the receiver
When installing this unit, make sure to put it on a
secure and level plane that is stable.
Don’t place it on the following places:
– on a color TV (the screen may distort)
– near a cassette deck (or close to a device that gives
off a magnetic field). This may interfere with the
sound.
– in direct sunlight
– in damp or wet areas
– in extremely hot or cold areas
– in places where there is a vibration or other
movement
– in places that are very dusty
– in places that have hot fumes or oils (such as a
kitchen)
When making cable connections
Be careful not to arrange cables in a manner that bends
the cables over the top of this unit. If the cables are laid
on top of the unit, the magnetic field produced by the
transformers in this unit may cause a humming noise to
come from the speakers.
Connector Input Output
DVD
Composite, S-video,
RGB
STB
Composite, S-video,
RGB
VIDEO Composite, S-video,
RGB
Composite
DVR/TV
Composite Composite, S-video,
RGB
Standby
AV Direct On
RECEIVER
AV DIRECT
Standby
AV Direct On
03_Connecting_up.fm 9 ページ 2003年2月12日 水曜日 午前11時39分
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-C301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-C301 in the language / languages: English as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-C301

Pioneer VSX-C301 User Manual - German - 44 pages

Pioneer VSX-C301 User Manual - Dutch - 88 pages

Pioneer VSX-C301 User Manual - French, Italian - 88 pages

Pioneer VSX-C301 User Manual - Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info