455261
50
Zoom out
Zoom in
Previous page
1/56
Next page
50
En
Symptom
No sound from surround
or center speakers.
No sound from subwoofer
Sound is produced from
analog components, but
not from digital ones
(DVD, LD, CD-ROM etc.).
No sound is output or a
noise is output when
Dolby Digital/DTS soft-
ware is played back.
When a search is per-
formed by a DTS compat-
ible CD player during play-
back, noise is output.
The Dolby/DTS indicator
doesn't light when playing
Dolby/DTS software.
When playing a 96 kHz/
24bit disc the sound is too
loud.
Cause
Speaker settings are incorrect.
The surround and/or center levels are
turned down.
The surround and/or center speakers are
disconnected.
The subwoofer is disconnected.
The subwoofer's settings are incorrect.
The subwoofer's levels are too low.
The LFE Attenuator is set to OFF.
Digital connections are incorrect.
.
The digital output of the player is turned
off.
The CD-ROM player is outputting a data
stream (not an audio signal) which is in-
compatible with this receiver.
Digital connections are incorrect.
Analog input has been selected.
A DVD player not compatible with
Dolby Digital/DTS is being used.
The settings on the DVD player are in-
correct and/or the DTS signal output is
turned off.
The digital output level is turned down
on a CD player or other component
equipped with digital output level ad-
justment capability. (The DTS signal has
been altered by the player, and cannot
be read.)
The search function performed by the
player slightly alters the digital informa-
tion, making it unreadable.
The player is paused
The player's sound output settings are
wrong.
Different discs have different recording
levels so some may be louder than oth-
ers.
Remedy
Refer to Speakers setting mode on page
26 to check the speaker settings.
Turn levels up. Refer to Setting the vol-
ume level of each channel on page 29 to
check the speaker levels.
Connect the speakers (refer to page 14).
Connect the subwoofer (refer to page 14).
Set subwoofer to ON or PLUS (refer to
page 26).
Set the FRONT speakers to SMALL (refer
to page 26).
Refer to Setting the volume level of each
channel on page 29 to check the speaker
levels.
Set the LFE Attenuator to either 0dB or -
10dB (refer to page 27).
Make digital connections (refer to page
11)
Turn on the digital output of the player
on (consult the manual that came with
the player, if necessary).
Use a player that is compatible with this
receiver.
Make digital connections (refer to page
11).
Select digital input (refer to page 39).
Make sure your DVD player is compat-
ible with Dolby Digital/DTS.
Make sure the player's settings are cor-
rect and/or the DTS signal out is on. Re-
fer to the instruction manual supplied
with the DVD player.
Set the digital volume level of the player
to full, or to the neutral position.
This is not a malfunction, but be sure to
turn the volume down to prevent the out-
put of loud noise from your speakers.
Press play.
Set the player correctly (consult the
manual that came with the player, if nec-
essary).
Turn the volume down.
Additional Information
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-C300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-C300 in the language / languages: English as an attachment in your email.

The manual is 5,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-C300

Pioneer VSX-C300 User Manual - English - 1 pages

Pioneer VSX-C300 User Manual - German - 56 pages

Pioneer VSX-C300 User Manual - Dutch - 112 pages

Pioneer VSX-C300 User Manual - French, Italian - 112 pages

Pioneer VSX-C300 User Manual - Portuguese, Swedish - 112 pages

Pioneer VSX-C300 User Manual - Spanish - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info