455260
55
Zoom out
Zoom in
Previous page
1/60
Next page
55
En
English
Symptom
No sound from surround
or center speakers.
No sound from
subwoofer
Sound is produced from
analog components, but
not from digital ones
(DVD, LD, CD-ROM
etc.).
No sound is output or a
noise is output when
Dolby Digital/DTS
software is played back.
When a search is per-
formed by a DTS compat-
ible CD player during
playback, noise is output.
The Dolby/DTS indicator
doesn't light when
playing Dolby/DTS
software.
When playing a 96 kHz/
24bit disc the sound is
too loud.
Cause
Surround or center speaker settings are
incorrect.
The surround and/or center levels are
turned down.
The surround and/or center speakers are
disconnected.
The subwoofer is disconnected.
The subwoofer's settings are incorrect.
The subwoofer's levels are too low.
The LFE Attenuator is set to OFF.
Digital connections are incorrect.
.
The digital output of the player is turned
off.
The CD-ROM player is outputting a data
stream (not an audio signal) which is in-
compatible with this receiver.
Digital connections are incorrect.
Analog input has been selected.
The digital input assignment is wrong.
A DVD player not compatible with
Dolby Digital/DTS is being used.
The settings on the DVD player are in-
correct and/or the DTS signal output is
turned off.
The digital output level is turned down
on a CD player or other component
equipped with digital output level ad-
justment capability. (The DTS signal has
been altered by the player, and cannot
be read.)
The search function performed by the
player slightly alters the digital informa-
tion, making it unreadable.
The player is paused.
The player's sound output settings are
wrong.
Different discs have different recording
levels so some may be louder than oth-
ers.
Remedy
Refer to speakers setting mode on page
28 to check the speaker settings.
Turn levels up. Refer to Setting the
Volume Level of Each Channel on page
32 to check the speaker levels.
Connect the speakers (refer to page 16).
Connect the subwoofer (refer to page 16).
Set the subwoofer (refer to page 28).
Set the front speakers to Small (S) (refer
to page 28).
Refer to Setting the Volume Level of
Each Channel on page 32 to check the
speaker levels.
Set the LFE Attenuator to either 0 dB or
10 dB (refer to page 29).
Make digital connections (refer to page
1114)
Turn on the digital output of the player
on (consult the manual that came with
the player, if necessary).
Use a player that is compatible with this
receiver.
Make digital connections (refer to page
1114).
Select digital input (refer to page 44).
Assign the digital input (refer to page 31).
Make sure your DVD player is compat-
ible with Dolby Digital/DTS.
Make sure the player's settings are
correct and/or the DTS signal out is on.
Refer to the instruction manual
supplied with the DVD player.
Set the digital volume level of the player
to full, or to the neutral position.
This is not a malfunction, but be sure to
turn the volume down to prevent the
output of loud noise from your
speakers.
Press play.
Set the player correctly (consult the
manual that came with the player, if
necessary).
Turn the volume down.
Additional Information
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-C100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-C100 in the language / languages: English as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-C100

Pioneer VSX-C100 User Manual - German - 60 pages

Pioneer VSX-C100 User Manual - Dutch - 120 pages

Pioneer VSX-C100 User Manual - French, Italian - 120 pages

Pioneer VSX-C100 User Manual - Italian - 120 pages

Pioneer VSX-C100 User Manual - Portuguese - 60 pages

Pioneer VSX-C100 User Manual - Turkish - 60 pages

Pioneer VSX-C100 User Manual - Finnish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info