455258
98
Zoom out
Zoom in
Previous page
1/104
Next page
Techno Tidbits and Problem-solving
98
En
No sound output from the
subwoofer.
The subwoofer setting is NO.
The subwoofer output setting is too low.
The bass peak level setting is too low.
There is very little low frequency informa-
tion in your source.
The crossover frequency is set too low.
There is a problem with the subwoofer.
The subwoofer isn’t connected properly.
Change the setting to YES or PLUS
(see page 39).
Adjust the output setting to the level
you want (see pages 41 and 85).
Adjust the bass peak level setting to
the level you want (see page 92).
Change your subwoofer setting to one
of the following (see page 39):
Front: SMALL Subwoofer:YES
Front:LARGE Subwoofer:PLUS
Raise the frequency level to match
your speakers’ characteristics (see
page 84).
Check the three following points:
•Check the power.
Check the subwoofer volume
control.
Check the subwoofer hasn’t
automatically switched to standby
mode (check the subwoofer
manual).
Check all connections (see page 25).
No sound output from the
surround back speakers.
The SB CH MODE is set to OFF.
The source is not a 6.1 channel playback
source.
The surround back speakers aren’t con-
nected properly.
The surround back channel is set to 1
speaker setting only, and the speaker is
connected to the right channel output.
Set the SB CH MODE to ON or AUTO
(see page 53).
Set the SB CH MODE to ON or AUTO
(see page 53) and choose one of the
SURROUND listening modes (see
pages 46 and 47).
Check all connections (see page 25).
Connect the speaker to the surround
back left channel output (see page 25).
No sound output from one
(set of) speaker(s).
The speaker system setting is NO.
The speaker isn’t connected properly.
The source has no sound output for that
channel.
The speaker output level is set too small.
Change the speaker setting to YES
(see page 39).
Check all connections (see page 25).
If you choose one of the SURROUND
listening modes, a channel may be
created for the speaker (see page 43).
Increase the speaker output level.
Sound is produced from some
components, but not from
digital components.
SIGNAL SELECT is set incorrectly.
The digital inputs are assigned incor-
rectly, or not at all.
The digital components aren’t con-
nected properly.
The player is not compatible with the
source you’re using, or the player set-
tings are incorrect.
The MULTI CH IN mode has been
selected.
The digital output level has been turned
down on a CD player or other compo-
nent equipped with digital output level
adjustment capability.
Set SIGNAL SELECT to AUTO or
according to the type of connections
made (see page 44).
Set the digital input settings correctly
(see pages 12, 23, and especially 81).
Check all connections.
Choose a compatible source, or check
the player’s manual for the correct set-
tings.
Choose one of the listening modes
(see page 45). The MULTI CH IN
switches off automatically.
Set the digital volume level of the
player to full, or to the neutral position.
Cause
Remedy
Symptom
00_VSX-AX3.book Page 98 Monday, May 19, 2003 1:05 PM
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-AX3-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-AX3-S in the language / languages: English as an attachment in your email.

The manual is 8,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-AX3-S

Pioneer VSX-AX3-S User Manual - German - 104 pages

Pioneer VSX-AX3-S User Manual - Dutch - 104 pages

Pioneer VSX-AX3-S User Manual - French - 104 pages

Pioneer VSX-AX3-S User Manual - Italian - 104 pages

Pioneer VSX-AX3-S User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info