455258
87
Zoom out
Zoom in
Previous page
1/104
Next page
Expert System Settings
87
En
EXPERT
Acoustic Calibration EQ
This receiver lets you choose between two types of ACOUSTIC CAL EQ equalizer curves: ALL CH ADJUST and
FRONT ALIGN, with the former equalizing the speakers individually and the latter equalizing the speakers in
accordance with the front speakers. Features here allow you to put in your own equalizer preferences. To do this use
the DATA COPY feature to copy the settings in ALL CH ADJUST and FRONT ALIGN modes and paste them into
CUSTOM 1 or CUSTOM 2. You then choose between the ALL CH ADJUST and FRONT ALIGN types of curves and
increase the amount of a certain frequency in each speaker in accordance with your preferences. When you
playback a source you can choose CUSTOM 1 or CUSTOM 2 to apply your preferences to playback. When setting up
using the ALL CH ADJUST mode you can adjust each speaker individually. With the FRONT ALIGN mode the front
speakers will serve as the reference so you cannot adjust them.
The DATA CHECK feature allows you to see how the settings in ALL CH ADJUST and FRONT ALIGN currently stand.
When you use ACOUSTIC CAL EQ function (see page 49) you can toggle between the two basic settings, ALL CH
ADJUST and FRONT ALIGN, and the variations you set yourself, CUSTOM 1 and CUSTOM 2.
To use the EQ AUTO SETTING feature follow the step
here.
Follow steps 1-5 on page 83, if necessary, to get to the
starting point mentioned here.
Memo:
If you have already performed AUTO SETTING (page 13), this
setting is not necessary.
1 ACOUSTIC CAL EQ should be selected.
If it isn’t use the  buttons to select
and press ENTER.
2 EQ AUTO SETTING should be
selected. If it isn’t use the  buttons
to select and press ENTER.
3 Select START and then press ENTER to
start EQ AUTO SETTING.
Make sure you have hooked up the microphone and
moved obstacles to the speakers out of the way. If you
have a subwoofer make sure it is turned on and has the
volume turned up.
WARNING: The test tones are very loud!! Make sure there
are no infants or small children in the room and that no
one who will be scared, upset or injured by loud noise is
present. You yourself may want to wear earplugs. It is
possible to lower the volume of test tones, but this could
result in incorrect speaker settings.
When done !! FINISH !! will appear on the screen. After
they have finished, move to the next step.
DATA COPY: You can store the settings in CUSTOM1 or
CUSTOM2 by selecting DATA COPY and pressing ENTER.
(For information on subsequent operations, see step 3 on
the following page.)
CHECK: If you like to view the settings, select CHECK and
then press ENTER. By selecting NEXT repeatedly, you can
view the settings for each channel.
4 When done select EXIT (if it’s not
already selected) and press ENTER.
Leave the setup by using the  buttons to select EXIT
and pressing ENTER. You can now go to another
ACOUSTIC CAL EQ setting by using the  buttons and
pressing ENTER. The MCACC indicator will light.
1
2
3
1-4
00_VSX-AX3.book Page 87 Monday, May 19, 2003 1:05 PM
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-AX3-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-AX3-S in the language / languages: English as an attachment in your email.

The manual is 8,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-AX3-S

Pioneer VSX-AX3-S User Manual - German - 104 pages

Pioneer VSX-AX3-S User Manual - Dutch - 104 pages

Pioneer VSX-AX3-S User Manual - French - 104 pages

Pioneer VSX-AX3-S User Manual - Italian - 104 pages

Pioneer VSX-AX3-S User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info