455258
33
Zoom out
Zoom in
Previous page
1/104
Next page
Displays and Controls
33
En
PREPARATION
Display
All the display information is explained and/or referenced here.
1 SIGNAL indicators
Light to indicate the input signal you selected.
AUTO: Lights when the receiver is set to select
the input signal automatically.
DIGITAL: Lights when digital audio signals are
selected.
ANALOG: Lights when analog signals are
selected.
2 Digital format indicators
PRO LOGIC II: Lights during Dolby Pro Logic II
processing.
NEO:6: Lights during NEO:6 processing.
2 DIGITAL: Lights when a Dolby Digital signal
is detected.
DTS: Lights when a DTS signal is detected.
ES: Lights when playing back a DTS ES signal.
EX: Lights when playing back a Dolby Digital EX
signal.
STEREO: Lights during two-channel playback.
3 LOUDNESS indicator
Lights when LOUDNESS is on.
4 MIDNIGHT indicator
Lights when MIDNIGHT is on.
5 TONE indicator
Lights when the TONE control is on.
6 DNR indicator
Lights when DIGITAL NR is on.
7 TUNER indicators
STEREO: Lights when an FM stereo broadcast is
received in the auto stereo mode.
MONO: Lights when the tuner is set to receive
FM broadcasts and when MPX mode is selected.
TUNED: Lights when a broadcast is received.
RF ATT (European model only): Lights when the
RF ATT is on (see page 56).
RDS (European model only): Lights when an RDS
broadcast is received.
EON (European model only): EON lights when
it has been set. The dot indicator next to it lights
when the station you are currently tuned to
carries the EON data service.
8 Volume level indicator
9 Hi-BIT/SAMPLING indicator
Lights when the AUDIO SCALER mode is on.
10 DSP indicators
MOVIE: Lights when a MOVIE mode is selected.
When a DSP MOVIE mode is selected DSP will
light with a box around it.
MUSIC: Lights when a MUSIC mode is selected.
When a DSP MUSIC mode is selected DSP will
light with a box around it.
11 Speaker indicators (see page 72)
Lights to indicate the current speaker system, A
and/or B.
12 Program Format indicators
For Dolby Digital or DTS sources: These
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source with a
6.1 channel playback flag is being used.
L – Left front channel.
C – Center channel.
R – Right front channel.
LS – Left surround channel.
S – Surround channel or Surround back channel.
RS – Right surround channel.
LFE – Low Frequency Effects channel.
Lights when LFE signal is input.
13 SB CH indicators (see page 53)
Light to indicate the status of the surround back
channels.
AUTO – Lights when the SB CH MODE or virtual
surround back mode is set to AUTO.
ON – Lights when the SB CH MODE or virtual
surround back mode is set to ON.
OFF – Lights when the SB CH MODE or virtual
surround back mode is set to OFF.
00_VSX-AX3.book Page 33 Monday, May 19, 2003 1:05 PM
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-AX3-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-AX3-S in the language / languages: English as an attachment in your email.

The manual is 8,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-AX3-S

Pioneer VSX-AX3-S User Manual - German - 104 pages

Pioneer VSX-AX3-S User Manual - Dutch - 104 pages

Pioneer VSX-AX3-S User Manual - French - 104 pages

Pioneer VSX-AX3-S User Manual - Italian - 104 pages

Pioneer VSX-AX3-S User Manual - Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info