Manual Pioneer VSX-930 K-S (page 99 of 142) (English)

586463

Zoom out

Zoom in

1/142

The MCACC PRO (VSX-1130/VSX-930)/Advanced MCACC (VSX-830) menu

Making receiver settings from the MCACC PRO (VSX-1130/VSX-

930)/Advanced MCACC (VSX-830) menu

The MCACC PRO/Advanced MCACC (Multi Channel ACoustic Calibration) system was developed in Pioneer’s

laboratories with the aim of making it possible for home users to perform adjustments of the same level as in a

studio easily and with high precision. The acoustic characteristics of the listening environment are measured and

the frequency response is calibrated accordingly to allow high precision, automatic analysis and optimal calibra-

tion of the sound field to bring it closer to a studio environment than ever before. Furthermore, while it was previ-

ously difficult to eliminate standing waves, this receiver is equipped with a standing wave control function using

a unique process to perform acoustic analysis and reduce their influence.

This section describes how to calibrate the sound field automatically and fine-adjust the sound field data

manually.

1 Press u STANDBY/ON to switch on the receiver and your TV.

Make sure that the TV’s video input is set to this receiver.

2 Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and

then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the

screens and select menu items. Press RETURN to exit the current menu.

! Press HOME MENU at any time to exit the HOME MENU.

3 Select ‘MCACC PRO’ (VSX-1130/VSX-930)/‘Advanced MCACC’ (VSX-830) from the

HOME MENU, then press ENTER.

4 Select the setting you want to adjust.

! Full Auto MCACC – See Automatically conducting optimum sound tuning (Full Auto MCACC) on page 57

for a quick and effective automatic surround setup.

! Auto MCACC – See Automatic MCACC (Expert) on page 99 for a more detailed MCACC setup.

! Manual MCACC – Fine-tunes your speaker settings and customizes the Acoustic Calibration EQ (see Manual

MCACC setup on page 101 ).

! MCACC Data Check – This displays the Advanced MCACC measurement results. Use it to check the MCACC

memory. For details, see Checking MCACC Data on page 103 .

! Data Management – Use this to manage the data in the MCACC memory. For details, see Data Management

on page 104 .

! Demo – No settings are saved and no errors occur. When the speakers are connected to this receiver, the

test tone is output repeatedly. Press RETURN to cancel the test tone.

Automatic MCACC (Expert)

If your setup requires more detailed settings than those provided in Automatically conducting optimum sound

tuning (Full Auto MCACC) on page 57 , you can customize your setup options below. You can calibrate your

system differently for up to six different MCACC presets, which are useful if you have different listening positions

depending on the type of source (for example, watching movies from a sofa, or playing a video game close to the

TV).

Important

! Make sure the microphone/speakers are not moved during the Auto MCACC Setup.

! The screen saver will automatically appear after five minutes of inactivity.

CAUTION

! The test tones used in the Auto MCACC Setup are output at high volume.

1 Select ‘Auto MCACC’ from the MCACC PRO (VSX-1130/VSX-930)/Advanced MCACC (VSX-

830) menu, then press ENTER.

If the Advanced MCACC screen is not displayed, refer to Making receiver settings from the MCACC PRO (VSX-

1130/VSX-930)/Advanced MCACC (VSX-830) menu on page 99 .

2 Select the parameters you want to set.

Use i/j to select the item, then use k/l to set.

! Auto MCACC – The default is ALL (recommended), but you can limit the system calibration to only one set-

ting (to save time) if you want.

— When data measurement is taken (after selecting ALL or Keep SP System), the reverb characteristics

data (both before- and after-calibration) that this receiver had been storing will be overwritten.

— When measurement is performed with other than SYMMETRY (after selecting ALL or Keep SP System),

the reverberation characteristics after calibration cannot be predicted, so the graph for the characteristics

after calibration (“After”) cannot be displayed. If you will need to display the graph for the characteristics

after calibration (“After”), take the measurement using the EQ Professional menu in the Manual MCACC

setup (page 101 ).

— The EQ Pro & S-Wave measurement is also taken when ALL or Keep SP System is selected. See

Acoustic Calibration EQ Professional on page 102 for more on this.

— Either effect of Acoustic Calibration EQ Professional and Standing Wave can be switched on and off in the

respective MCACC preset. For details, see Setting the Audio options on page 85 .

! EQ Type (only available when the Auto MCACC Menu above is EQ Pro & S-Wave) – This determines how the

frequency balance is adjusted.

After a single calibration is performed, each of the following three correction curves can be stored separately

in the MCACC memory.

— SYMMETRY implements symmetric correction for each pair of left and right speakers to flatten the

frequency-amplitude characteristics.

— ALL CH ADJ is a ‘flat’ setting where all the speakers are set individually so no special weighting is given to

any one channel.

— FRONT ALIGN sets all speakers in accordance with the front speaker settings (no equalization is applied

to the front left and right channels).

If you selected ALL or Keep SP System as your Auto MCACC menu, you can specify the MCACC preset

where you want to save the SYMMETRY, ALL CH ADJ and FRONT ALIGN settings.

EQ of subwoofer is automatically set when in ALL CH ADJ mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-930 K-S in the language / languages: English as an attachment in your email.

The manual is 20,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-930 K-S

Pioneer VSX-930 K-S User Manual - German - 146 pages

Pioneer VSX-930 K-S User Manual - Dutch - 146 pages

Pioneer VSX-930 K-S User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-930 K-S Manual

Product: