536828
29
Zoom out
Zoom in
Previous page
1/115
Next page
29
 
 
 
 
03
Connecting your equipment
MULTI-ZONE setup
This receiver can power up to two independent systems in separate rooms after you have made the proper MULTI-
ZONE connections.
Different sources can be playing in two zones at the same time or, depending on your needs, the same source
can also be used. The main and sub zone have independent power (the main zone power can be off while sub
zone is on) and the sub zone can be controlled by the remote or front panel controls.
Making MULTI-ZONE connections
It is possible to make these connections if you have the speakers for the sub zone (ZONE 2). You will also need a
separate amplifier if you are not using the speaker terminals for the sub zone (For detail, see MULTI-ZONE setup
using speaker terminals (ZONE 2) on page 30).
With the VSX-1123, it is also possible to connect a TV for the sub zone.
Also, if the separate receiver in the sub zone has an HDMI input terminal, this unit’s HDMI input can be played as
HDZONE.
Here are two primary sub zone setups possible with this system. Choose whichever works best for you.
Important
! The settings must be change at ZONE Setup in order to use the HDZONE function (page 88).
! VSX-923 model cannot connect the TV monitor for sub zone.
MULTI-ZONE listening options
The following table shows the signals that can be output to ZONE 2 and HDZONE:
In case of VSX-1123
Sub Zone Input functions available
ZONE 2
<a>
DVD, SAT/CBL, DVR/BDR, INTERNET RADIO, MEDIA SERVER, FAVORITES, iPod/USB,
TV, CD, TUNER, ADAPTER PORT
(Outputs analog audio and composite video.)
HDZONE
(HDMI)
<b>
BD, DVD, SAT/CBL, DVR/BDR, HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5/MHL, HDMI
6, HDMI 7
(Outputs HDMI audio and video signals)
a ! It is not possible to down-convert the audio and video input signals from the HDMI input terminals, digital input terminals
(OPTICAL and COAXIAL) and the COMPONENT VIDEO input terminals and output them to ZONE 2.
! When any of the INTERNET RADIO, MEDIA SERVER, FAVORITES, iPod/USB or ADAPTER PORT inputs is selected in the
main zone, it is only possible to select the same input as in the main zone for the sub zone. (Inputs other than the ones listed
here can be selected.)
The same limitations apply when one of the above inputs is selected for the sub zone.
b ! The inputs that can be switched differ according to how terminals HDMI IN 1 to IN 7 are assigned. Upon shipment from the
factory, the input terminals are assigned to DVD, SAT/CBL, DVR/BDR, HDMI 4, HDMI 5/MHL, HDMI 6 and HDMI 7, in order
starting from terminal HDMI IN 1.
! The video/audio signals of the RCA analog input terminals, the digital input terminals (OPTICAL and COAXIAL) and the COM-
PONENT VIDEO input terminals cannot be up-converted and output to the HDZONE.
! When any of the HDMI 4, HDMI 6 or HDMI 7 inputs is selected in the main zone, it is only possible to select the same input as
in the main zone for the HDZONE. (Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the HDZONE.
In case of VSX-923
Sub Zone Input functions available
ZONE 2
<a>
DVD, SAT/CBL, DVR/BDR, TV, CD, TUNER, ADAPTER PORT
(Output analog audio only.)
HDZONE
(HDMI)
<b>
BD, DVD, SAT/CBL, DVR/BDR, HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5/MHL, HDMI
6, HDMI 7
(Outputs HDMI audio and video signals)
a ! It is not possible to down-convert the audio input signal from the HDMI input terminals or digital input terminals (OPTICAL
and COAXIAL) and output them to ZONE 2.
b ! The inputs that can be switched differ according to how terminals HDMI IN 1 to IN 7 are assigned. Upon shipment from the
factory, the input terminals are assigned to DVD, SAT/CBL, DVR/BDR, HDMI 4, HDMI 5/MHL, HDMI 6 and HDMI 7, in order
starting from terminal HDMI IN 1.
! The video/audio signals of the RCA analog input terminals, the digital input terminals (OPTICAL and COAXIAL) and the COM-
PONENT VIDEO input terminals cannot be up-converted and output to the HDZONE.
! When any of the HDMI 4, HDMI 6 or HDMI 7 inputs is selected in the main zone, it is only possible to select the same input as
in the main zone for the HDZONE. (Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the HDZONE.
Basic MULTI-ZONE setup (ZONE 2)
1 Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2 VSX-1123 only: Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
ZONE 2
OUT
VIDEO
ZONE 2
OUT
ZONE 2
OUT
VIDEO
ZONE 2
OUT
RL
AUDIO IN
Sub zone (ZONE 2) Main zone
VIDEO IN
2
1
VSX-1123 only
29


Need help? Post your question in this forum.

Forumrules
1

Forum

pioneer-vsx-923

Reset search

  • My avr pioneer vsx-923 .only MCACC red light blinking this problem how to solve help me Submitted on 27-2-2021 at 14:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-923 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-923 in the language / languages: English as an attachment in your email.

The manual is 4,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-923

Pioneer VSX-923 Quick start guide - English, German - 44 pages

Pioneer VSX-923 User Manual - German - 120 pages

Pioneer VSX-923 Quick start guide - Dutch - 44 pages

Pioneer VSX-923 User Manual - Dutch - 118 pages

Pioneer VSX-923 User Manual - Danish - 226 pages

Pioneer VSX-923 Quick start guide - French - 44 pages

Pioneer VSX-923 User Manual - French - 117 pages

Pioneer VSX-923 Quick start guide - Italian - 44 pages

Pioneer VSX-923 User Manual - Italian - 117 pages

Pioneer VSX-923 User Manual - Swedish - 115 pages

Pioneer VSX-923 User Manual - Turkish - 116 pages

Pioneer VSX-923 Quick start guide - Spanish - 44 pages

Pioneer VSX-923 User Manual - Spanish - 115 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info