Manual Pioneer VSX-922S (page 58 of 109) (English)

491804

Zoom out

Zoom in

1/109

Using other functions

Setting What it does Option(s)

A.ATT

(Analog input attenuate)

The input attenuator lowers the input level of an analog signal when

it’s too strong. You can use this if you find that the OVER indicator

lights often or you can hear distortion in the sound.

The attenuator isn’t available with digital sources, or when using the

Stream Direct (ANALOG DIRECT) modes.

OFF

SACD GAIN

<e>

Brings out detail in SACDs by maximizing the dynamic range (during

digital processing).

0dB

+6dB

HDMI

(HDMI Audio)

<f>

Specifies the routing of the HDMI audio signal out of this receiver

(amp) or through to a TV. When THROUGH is selected, no sound is

output from this receiver.

AMP

THROUGH

A.DELAY

(Auto delay)

<g>

This feature automatically corrects the audio-to-video delay between

components connected with an HDMI cable. The audio delay time

is set depending on the operational status of the display connected

with an HDMI cable. The video delay time is automatically adjusted

according to the audio delay time.

OFF

C.WIDTH

(Center Width)

(Applicable only when using a

center speaker)

<h>

Provides a better blend of the front speakers by spreading the center

channel between the front right and left speakers, making it sound

wider (higher settings) or narrower (lower settings).

c 0 to 7 d

Default: 3

DIMENSION

<h>

Adjusts the depth of the surround sound balance from front to back,

making the sound more distant (minus settings), or more forward

(positive settings).

c –3 to +3 d

Default: 0

PANORAMA

<h>

Extends the front stereo image to include the surround speakers for a

‘wraparound’ effect.

OFF

C.IMAGE

(Center Image)

(Applicable only when using a

center speaker)

<i>

Adjusts the center image to create a wider stereo effect with vocals.

Adjust the effect from 0 (all center channel sent to front right and left

speakers) to 10 (center channel sent to the center speaker only).

c 0 to 10 d

Defaults:

Neo:6 MUSIC: 3

Neo:6 CINEMA: 10

EFFECT

Sets the effect level for the currently selected Advanced Surround or

ALC mode (each mode can be set separately).

c 10 to 90 d

Defaults:

EXT.STEREO: 90

Others: 50

H.GAIN

(Height Gain)

Adjusts the output from the front height speaker when listening in 2

Pro Logic IIz HEIGHT mode. If set to HIGH, the sound from the top

will be more emphasized.

LOW

MID

HIGH

V.SB

(Virtual Surround Back)

<j>

When you’re not using surround back speakers, selecting this mode

allows you to hear a virtual surround back channel through your sur-

round speakers. You can choose to listen to sources with no surround

back channel information.

OFF

V.HEIGHT

(Virtual Height)

<k>

When you’re not using front height speakers, selecting this mode

allows you to hear a virtual front height channel through your front

speakers.

OFF

V.WIDE

(Virtual Wide)

<l>

When you’re not using front wide speakers, selecting this mode

allows you to hear a virtual front wide channel through your front

speakers.

This improves the continuity of the sound from the front channel to

the surround channels.

OFF

Setting What it does Option(s)

V.DEPTH

(Virtual Depth)

<m>

When this mode is selected, the sound field expands virtually to

behind the display, resulting in a sound field with the same depth as

the 3D picture to achieve a better sense of presence.

OFF

MIN

MID

MAX

a The adjustment can be made only when TONE is set to ON.

b ! When ON is selected, the Sound Retriever effect is optimized based on the bitrate information of the contents input to the

USB memory audio and INTERNET RADIO, MEDIA SERVER, FAVORITES (digital audio input only) to achieve high sound qual-

ity.

! With the iPod/USB, INTERNET RADIO, MEDIA SERVER, FAVORITES or ADAPTER PORT input function, by default S.RTRV is

set to ON.

! When ON is selected, optimum correction of the audio signals input via the HDMI OUT terminal is conducted with the HDMI

ARC (Audio Return Channel) function, and the sound of digital TV broadcasts is produced with HD quality. This is valid when

the input is set to TV and ARC in HDMI Setup is set to ON. (See HDMI Setup on page 54.)

c UP1 to UP4 can be selected only when the front height speaker is connected. The presence or absence of effects depends on

the listening mode.

d The initially set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby TrueHD.

e You shouldn’t have any problems using this with most SACD discs, but if the sound distorts, it is best to switch the gain setting

back to 0dB.

f ! The HDMI Audio setting cannot be switched while performing synchronized amp mode operations.

! The synchronized amp mode must be turned on in order to play the receiver’s HDMI audio and video input signals from the TV

with the receiver’s power in the standby mode. See About synchronized operations on page 55.

g This feature is only available when the connected display supports the automatic audio/video synchronizing capability (‘lipsync’)

for HDMI. If you find the automatically set delay time unsuitable, set A.DELAY to OFF and adjust the delay time manually. For

more details about the lipsync feature of your display, contact the manufacturer directly.

h Only when listening to 2-channel sources in Dolby Pro Logic IIx Music/Dolby Pro Logic II Music mode.

i Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA mode.

j ! You can’t use the Virtual Surround Back mode when the headphones are connected to this receiver or when any of the stereo,

Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Surround Back mode if the surround speakers are on and the SB setting is set to NO or if Front

Bi-Amp or ZONE 2 is selected at Speaker System. It can also be used when Speaker B is selected at Speaker System and

SP:dA+B ON is selected with the SPEAKERS button.

! This mode is effective for contents with a sampling frequency of 48 kHz or less.

k ! You can’t use the Virtual Height mode when the headphones are connected to this receiver or when any of the stereo, Front

Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Height mode if the surround speakers are on and the FH setting is set to NO. It can also not be

used when playing signals containing actual front height channel information.

! This mode is effective for contents with a sampling frequency of 48 kHz or less.

l ! You can’t use the Virtual Wide mode when the headphones are connected to this receiver or when any of the stereo, Front

Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected.

! You can only use the Virtual Wide mode if the surround speakers are on and the FW setting is set to NO. It can also not be

used when playing signals containing actual front wide channel information.

! This mode is effective for contents with a sampling frequency of 48 kHz or less.

m ! This mode is effective for contents with a sampling frequency of 48 kHz or less.

! You can’t use the Virtual Depth mode when the headphones are connected to this receiver or Stream Direct modes is

selected.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-922S in the language / languages: English as an attachment in your email.

The manual is 6,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-922S

Pioneer VSX-922S Quick start guide - English, German - 44 pages

Pioneer VSX-922S User Manual - German - 113 pages

Pioneer VSX-922S Quick start guide - Dutch - 44 pages

Pioneer VSX-922S User Manual - Dutch - 111 pages

Pioneer VSX-922S Quick start guide - French - 44 pages

Pioneer VSX-922S User Manual - French - 112 pages

Pioneer VSX-922S Quick start guide - Italian, Spanish - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-922S Manual

Product: