574201
102
Zoom out
Zoom in
Previous page
1/400
Next page
The System Setup and Other Setup menus11
102
En
Speaker Setting
Use this setting to specify your speaker
configuration (size, number of speakers and
crossover frequency). It is a good idea to make
sure that the settings made in Automatically
conducting optimum sound tuning (Auto
MCACC) on page 39 are correct. Note that this
setting applies to all MCACC presets, and
cannot be set independently.
1 Select ‘
Speaker Setting
’ from the
Manual SP Setup
menu.
2 Choose the set of speakers that you want
to set, then select a speaker size.
Use / to select the size (and number) of
each of the following speakers:
1
Front – Select LARGE if your front
speakers reproduce bass frequencies
effectively, or if you didn’t connect a
subwoofer. Select SMALL to send the bass
frequencies to the subwoofer.
Center – Select LARGE if your center
speaker reproduces bass frequencies
effectively, or select SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect a center
speaker, choose NO (the center channel is
sent to the front speakers).
FH – Select LARGE if your front height
speakers reproduce bass frequencies
effectively, or select SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect front
height speakers, choose NO (the front
height channel is sent to the front
speakers).
2
FW – Select LARGE if your front wide
speakers reproduce bass frequencies
effectively, or select SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect front wide
speakers, choose NO (the front wide
channel is sent to the front speakers).
3
Surr – Select LARGE if your surround
speakers reproduce bass frequencies
effectively. Select SMALL to send bass
frequencies to the other speakers or
subwoofer. If you didn’t connect surround
speakers choose NO (the sound of the
surround channels is sent to the front
speakers or a subwoofer).
SB – Select the number of surround back
speakers you have (one, two or none).
4
Select LARGEx2 or LARGEx1 if your
surround back speakers reproduce bass
frequencies effectively. Select SMALLx2 or
SMALLx1 to send bass frequencies to the
other speakers or subwoofer. If you didn’t
connect surround back speakers choose
NO.
Note
1 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround,
surround back, front height and front wide speakers can’t be set to LARGE if the front speakers are set to SMALL. In
this case, all bass frequencies are sent to the subwoofer.
2 • You can only adjust the front height speakers when Speaker System is set to Normal(SB/FH).
• If the surround speakers are set to NO, the front height speakers will automatically be set to NO.
3 • You can only adjust the front wide speakers when Speaker System is set to Normal(SB/FW).
• If the surround speakers are set to NO, the front wide speakers will automatically be set to NO.
4 • If you selected ZONE 2 or Front Bi-Amp (in Speaker system setting on page 101) you can’t adjust the surround back
settings.
• If the surround speakers are set to NO, the surround back speakers will automatically be set to NO.
• If you select one surround back speaker only, make sure that speaker is hooked up to the left surround back
terminal.
VSX-1020_SYXCN.book 102 ページ 2010年3月12日 金曜日 午前9時10分
102


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-920-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-920-K in the language / languages: English, French as an attachment in your email.

The manual is 35,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-920-K

Pioneer VSX-920-K User Manual - German - 532 pages

Pioneer VSX-920-K Additional guide - Dutch - 35 pages

Pioneer VSX-920-K User Manual - Dutch - 532 pages

Pioneer VSX-920-K User Manual - Danish - 338 pages

Pioneer VSX-920-K User Manual - Italian - 532 pages

Pioneer VSX-920-K User Manual - Portuguese - 86 pages

Pioneer VSX-920-K User Manual - Swedish - 338 pages

Pioneer VSX-920-K User Manual - Spanish, Spanish - 532 pages

Pioneer VSX-920-K User Manual - Norwegian, Finnish - 338 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info