574201
79
Zoom out
Zoom in
Previous page
1/400
Next page
Controlling the rest of your system 09
79
En
English
Français
Deutsch
Nederlands
Italiano
Español
3 Point the two remote controls towards
each other, then press the button that will be
doing the learning on this receiver’s remote
control.
The LED blinks once and flashes continuously.
The remote controls should be 3 cm apart.
4 Press the corresponding button on the
other remote control that is sending (teaching)
the signal to this receiver’s remote control.
If the LED lights for one second, the setting has
been successfully completed.
1
5 To program additional signals for the
current component repeat steps 3 and 4.
To program signals for another component,
exit and repeat steps 2 through 4.
6 Press
R.SETUP
to exit the programming
mode.
Erasing one of the remote
control button settings
This erases one of the buttons you have
programmed and restores the button to the
factory default.
1 Press and hold
R.SETUP
, then press “7
for three seconds.
The LED flashes continuously.
To cancel the preset setup mode press
R.SETUP.
2 Press the input function button
corresponding to the command to be erased,
then press
ENTER
.
The LED flashes once.
3 Press and hold the button to be erased
for three seconds.
If the LED lights for one second, the erasing
has been successfully completed.
4 Repeat step 3 to erase other buttons.
5Press
R.SETUP
to exit the erasing mode.
Note
1 • Note that interference from TVs or other devices will sometimes result in the remote control learning the wrong
signal.
• Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be
moved closer together or farther apart.
• If the LED flashes for five seconds, it means the memory is full. See Resetting the input assignment of one of the
input function buttons above to erase a programmed button you’re not using to free up more memory (note that some
signals may take more memory than others).
3 cm
This receiver’s
remote control
Other remote
control
VSX-1020_SYXCN.book 79 ページ 2010年3月12日 金曜日 午前9時10分
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-920-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-920-K in the language / languages: English, French as an attachment in your email.

The manual is 35,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-920-K

Pioneer VSX-920-K User Manual - German - 532 pages

Pioneer VSX-920-K Additional guide - Dutch - 35 pages

Pioneer VSX-920-K User Manual - Dutch - 532 pages

Pioneer VSX-920-K User Manual - Danish - 338 pages

Pioneer VSX-920-K User Manual - Italian - 532 pages

Pioneer VSX-920-K User Manual - Portuguese - 86 pages

Pioneer VSX-920-K User Manual - Swedish - 338 pages

Pioneer VSX-920-K User Manual - Spanish, Spanish - 532 pages

Pioneer VSX-920-K User Manual - Norwegian, Finnish - 338 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info