794004
55
Zoom out
Zoom in
Previous page
1/76
Next page
Other connections 10
55
En
English Français
Deutsch
Nederlands
Italiano Español
Chapter 10:
Other connections
Caution
Before making or changing the connections
,
switch off the power and disconnect the
power cord from the power outlet.
Plugging in components should be the last
connection you make with your system.
Do not allow any contact between speaker
wires from different terminals.
You can use speakers with a nominal
impedance between 6
to 16
(please
see
Switching the speaker impedance
on
page 72 if you plan to use speakers with an
impedance of less than 8
).
Connecting an iPod
This receiver has a dedicated iPod terminal
that will allow you to control playback of audio
content from your iPod using the controls of
this receiver.
1
Connecting your iPod to the receiver
1 Set this receiver to the standby mode,
and then use the USB cable (for iPod
connection) to connect your iPod to the iPod
DIRECT terminal on the front panel of this
receiver.
For the cable connection, refer to also the
operating instructions for iPod.
2Switch the receiver on and press the
iPod
input source
button to switch the receiver to
the iPod.
The front panel display shows
Loading
while
the receiver verifies the connection and
retrieves data from the iPod.
3 Use the
TOP MENU
button to display
iPod Top menu.
When the display shows
Top Menu
you’re
ready to play music from the iPod.
2
If after pressing
iPod
the display shows
No Connection
, try switching off the
receiver and reconnecting the iPod to the
receiver.
Note
1• This system is compatible with the audio of an iPod and iPod nano portable device (fifth generation and above). However,
that some of the functions may be restricted for some models. Note, however, compatibility may vary depending on the
software version of your iPod. Please be sure to use the latest available software version.
• iPod is licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.
• Features such as the equalizer cannot be controlled using this receiver, and we recommend switching the equalizer off
before connecting.
• Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience
or loss of recorded material resulting from the iPod failure.
MASTER
VOLUME
AM SIRIUS
MCACC
PORTABLE
AUX
This receiver
USB cable (for
iPod connection)
iPod DIRECT
iPod
MENU
iPod

Music >
Extras >
Settings >
Shuffle Songs
Backlight
2 The controls of your iPod will be inoperable when connected to this receiver (
Pioneer
shows in the iPod display).
VSX_918_818_KU.book 55 ページ 2007年11月28日 水曜日 午後6時58分
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-918V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-918V in the language / languages: English as an attachment in your email.

The manual is 1.81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info