455251
63
Zoom out
Zoom in
Previous page
1/74
Next page
Other Settings 11
63
En
English
Français
Deutsch
Nederlands
Italiano
Español
2 Select the number of the component
video input to which you’ve connected your
video component.
The numbers correspond with the numbers
beside the inputs on the back of the receiver.
3 Select the component that corresponds
with the one you connected to that input.
Select between DVD, TV, DVR or OFF.
•Use / and ENTER to do this.
Make sure you have connected the audio
from the component to the corresponding
inputs on the rear of the receiver.
If you connect any source component to
the receiver using a component video
input, you should also have your TV
connected to this receiver's component
video MONITOR output (down converting
component video is not possible after
assigning an input).
4 When you're finished, press RETURN.
You return to the Input Assign menu.
Assigning the HDMI inputs
•Default settings:
HDMI - 1 – DVD
HDMI - 2 – TV
If you used HDMI to connect your video
equipment, you must tell the receiver which
input terminal(s) you have used, so that you
see the proper video signal when you select the
input source.
1 Select ‘HDMI Input’ from the Input Assign
menu.
2 Select the number of the HDMI input to
which you’ve connected your video
component.
The numbers correspond with the numbers
beside the inputs on the back of the receiver.
3 Select the component that corresponds
with the one you connected to that input.
Select between DVD, TV, DVR or OFF.
•Use / and ENTER to do this.
To hear audio from your HDMI component
(through this system), you must also make
separate audio connections to the
corresponding inputs on the rear of the
receiver. For more on this, see Connecting
using HDMI on page 57
If you connect any video component to the
receiver using HDMI, you should also have
your TV connected to this receiver's HDMI
output.
4 When you're finished, press RETURN.
You return to the Input Assign menu.
The Other Setup menu
The Other Setup menu is where you can make
customized settings to reflect how you are
using the receiver.
1Press
RECEIVER
on the remote control,
then press the
SETUP
button.
An on-screen display (OSD) appears on your
TV. Use /// and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
2 Select ‘Other Setup’ then press
ENTER
.
3 Select the setting you want to adjust.
If you are doing this for the first time, you may
want to adjust these settings in order:
DRC Setup – Specify the amount of
dynamic range adjustment to Dolby Digital
soundtracks (see Dynamic Range Control
Setup on page 64).
5. Input Assign
:Return
a.Digital Input
b.Component Input
c.HDMI Input
System Setup
1.Surr Back System
2.Auto MCACC
3.Manual MCACC
4.Manual SP Setup
5.Input Assign
6.Other Setup
: Exit
6.Other Setup
:Return
a.DRC Setup
b.Dual Mono Setup
c.LFE ATT Setup
d.SR
+
Setup
e.DVC Setup
VSX_917.book.fm Page 63 Thursday, December 7, 2006 4:40 PM
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-917V-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-917V-K in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-917V-K

Pioneer VSX-917V-K User Manual - German - 70 pages

Pioneer VSX-917V-K User Manual - Dutch - 70 pages

Pioneer VSX-917V-K User Manual - French - 70 pages

Pioneer VSX-917V-K User Manual - Italian - 70 pages

Pioneer VSX-917V-K User Manual - Swedish - 134 pages

Pioneer VSX-917V-K User Manual - Spanish - 70 pages

Pioneer VSX-917V-K User Manual - Norwegian, Finnish - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info