455251
31
Zoom out
Zoom in
Previous page
1/74
Next page
Listening to your system 05
31
En
English
Français
Deutsch
Nederlands
Italiano
Español
While listening to a source, press
AUTO
SURR
to select the Stream Direct mode.
AUTOSURR. – See Auto playback on
page 28.
DIRECT – Sources are heard according to
the settings made in the Surround Setup
(speaker setting, channel level, speaker
distance), as well as with dual mono,
Center Width, Dimension and Panorama
settings. You will hear sources according
to the number of channels in the signal.
For analog sources, only Channel Level can
be set. All other digital processing can not
be set.
Listening with Acoustic
Calibration EQ
•Default setting: OFF / ALL CH (after the
Auto MCACC Setup or EQ Auto Setting)
You can listen to sources using the Acoustic
Calibration Equalization set in Automatically
setting up for surround sound (MCACC) on
page 8 or Acoustic Calibration EQ on page 38.
Refer to these pages for more on Acoustic
Calibration Equalization.
While listening to a source, press
ACOUSTIC EQ.
Press repeatedly to select between:
ALL CH – No special weighting is given to
any one channel.
F. ALIGN – All speakers are heard in
accordance with the front speaker settings.
CUSTOM 1/2 – Custom settings
EQ OFF – Switches Acoustic Calibration
EQ off.
The MCACC indicator on the front panel lights
when Acoustic Calibration EQ is active.
1
Using surround back channel
processing
•Default setting: SB ON
You can have the receiver automatically use
6.1 decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES), or you
can choose to always use 6.1 decoding (for
example, with 5.1 encoded material). With 5.1
encoded sources, a surround back channel
will be generated, but the material may sound
better in the 5.1 format for which it was
originally encoded (in which case, you can
simply switch surround back processing off).
2
The table below indicates when you will hear
the surround back channel (
=Sound plays
through surround back speaker(s)).
•Press
SB ch
(
SB ch PROCESSING
) to select
a surround back channel option.
Each press cycles through the following:
SB ON – 6.1 decoding is always used (for
example, a surround back channel will be
generated for 5.1 encoded material)
SB AUTO – Automatically switches to 6.1
decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)
SB OFF – Maximum 5.1 playback
SOUND
RETRIEVER
DIALOG
C/C S
ACOUSTIC EQPHASE
Note
1 • You can’t use Acoustic Calibration EQ with DVD 5.1ch, Stream Direct mode, WMA9 Pro or XM HD Surround, and it has no
effect with headphones.
• You can only select SB AUTO when Stream Direct mode is on and the surround back speaker is set to LARGE or SMALL in
speaker settings.
2 You can’t use the surround back channel with headphones, the Stereo, Front Stage Surround Advance mode, or if the surround
back speaker is set to NO in Speaker Setting on page 41. Also, the Surround back speaker setting on page 35 must be set to
Normal (SB) to hear the surround back channel.
VSX_917.book.fm Page 31 Thursday, December 7, 2006 4:40 PM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-917V-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-917V-K in the language / languages: English as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-917V-K

Pioneer VSX-917V-K User Manual - German - 70 pages

Pioneer VSX-917V-K User Manual - Dutch - 70 pages

Pioneer VSX-917V-K User Manual - French - 70 pages

Pioneer VSX-917V-K User Manual - Italian - 70 pages

Pioneer VSX-917V-K User Manual - Swedish - 134 pages

Pioneer VSX-917V-K User Manual - Spanish - 70 pages

Pioneer VSX-917V-K User Manual - Norwegian, Finnish - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info