574068
91
Zoom out
Zoom in
Previous page
1/123
Next page
The system and the other setup
11
91
En
Surr Back System – Specifies how you are using your
surround back speakers (see below).
Speaker Setting – Specifies the size and number of
speakers you’ve connected (see below).
Channel Level – Adjusts the overall balance of your
speaker system (page 92).
Speaker Distance – Specifies the distance of your
speakers from the listening position (page 93).
X-Curve – Adjusts the tonal balance of your speaker
system for movie soundtracks (page 93).
THX Audio Setting – Specifies whether you are
using a THX speaker setup (page 93).
3 Make the adjustments necessary for each setting,
pressing
RETURN
to confirm after each screen.
Surround back speaker setting
Default setting: Normal
There are several ways you can use the surround back
speaker channels with this system. In addition to a
normal home theater setup where they are used for the
surround back speakers, they can be used for bi-amping
the front speakers or as an independent speaker system
in another room.
1 Select ‘
Surr Back System
’ from the
Manual SP
Setup
menu.
See Making receiver settings from the System Setup menu
on page 90 if you’re not already at this screen.
2 Select the surround back speaker setting.
Normal – Select for normal home theater use with
surround back speakers in your main (speaker
system A) setup.
Speaker B – Select to use the (surround back) B
speaker terminals to listen to stereo playback in
another room (see Switching the speaker system on
page 69).
Front Bi-Amp – Select this setting if you’re bi-
amping your front speakers (see Bi-amping your
speakers on page 21).
ZONE 2 – Select to use the (surround back) B
speaker terminals for an independent system in
another zone (see Using the MULTI-ZONE controls on
page 69).
3 When ‘
Setting Change?
’ is displayed, select
Yes
.
If No is selected, the setting is not changed.
You will return to the Manual SP Setup menu.
Speaker Setting
Use this setting to specify your speaker configuration
(size, number of speakers and crossover frequency)
1
. It is
a good idea to make sure that the settings made in
Automatically setting up for surround sound (Auto
MCACC) on page 41 are correct. Note that this setting
applies to all MCACC presets, and cannot be set
independently.
1Select
Speaker Setting
’ from the
Manual SP Setup
menu.
2 Choose the set of speakers that you want to set,
then select a speaker size.
Use / to select the size (and number) of each of the
following speakers:
2
Front – Select LARGE if your front speakers
reproduce bass frequencies effectively, or if you
didn’t connect a subwoofer. Select SMALL to send
the bass frequencies to the subwoofer.
Center – Select LARGE if your center speaker
reproduces bass frequencies effectively, or select
SMALL to send bass frequencies to the other
speakers or subwoofer. If you didn’t connect a center
speaker, choose NO (the center channel is sent to
the front speakers).
Surr – Select LARGE if your surround speakers
reproduce bass freque
ncies effective
ly. Select
SMALL to send bass frequencies to the other
speakers or subwoofer. If you didn’t connect
surround speakers choose NO (the sound of the
surround channels is sent to the front speakers or a
subwoofer).
1. Surr Back System
2. Speaker Setting
3. Channel Level
4a.Manual SP Setup
4. Speaker Distance
5. X-Curve
6. THX Audio Setting
A/V RECEIVER
Exit Return
Normal
Front : Normal
4a1.Surr Back System
Center : Normal
Surr : Normal
SB : Normal
OK
A/V RECEIVER
Exit Return
Note
1If youre using a THX speaker setup, set all speakers to SMALL.
2 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround and surround back
speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.
1. Surr Back System
2. Speaker Setting
3. Channel Level
4. Speaker Distance
5. X-Curve
6. THX Audio Setting
4a.Manual SP Setup
A/V RECEIVER
Exit Return
Front : LARGE
Surr : LARGE
Center : LARGE
4a2.Speaker Setting
SB : LARGE x 2
SW : YES
X.OVER : 80Hz
A/V RECEIVER
Exit Return
VSX-9140TXH_CUXJ.book 91 ページ 2009年4月16日 木曜日 午前10時36分
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-9140TXH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-9140TXH in the language / languages: English as an attachment in your email.

The manual is 11,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info