Manual Pioneer VSX-830 K (page 71 of 137) (English)

586462

Zoom out

Zoom in

1/137

Listening to your system

Enjoying various types of playback using the listening modes

Using this receiver, you can listen to any source in surround sound. However, the options available will depend

on your speaker setup and the type of source you’re listening to.

To play with surround sound, check “Standard surround sound” or “Using the Advanced surround effects” below

and select the desired mode.

To play with the optimum mode for the input signal, see “Auto playback” or “Using Stream Direct”. (The sound is

played in stereo when 2-channel signals are input, in surround when multi-channel signals are input.)

Important

! The listening modes and many features described in this section may not be available depending on the cur-

rent source, settings and status of the receiver.

Auto playback

There are many ways to listen back to sources using this receiver, but the simplest, most direct listening option

is the Auto Surround feature. The receiver automatically detects what kind of source you’re playing and selects

multichannel or stereo playback as necessary.

% While listening to a source, press AUTO (AUTO SURR/ALC/STREAM DIRECT) for auto

playback of a source.

AUTO SURROUND shows briefly in the display before showing the decoding or playback format. Check the digi-

tal format indicators in the front panel display to see how the source is being processed.

! If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically

be selected and shows in the display.

! When listening to the BT AUDIO input, the SOUND RETRIEVER AIR feature is selected automatically.

ALC –

In the Auto level control (ALC) mode, this receiver equalizes playback sound levels.

Also, the low and high frequency sounds, dialogs, surround effects, etc., that are difficult to hear when the volume

is low are adjusted to be optimal for the volume level. This mode is particularly optimum when listening at night.

Note

When ALC is selected, the effect level can be adjusted using the EFFECT parameter in Setting the Audio options

on page 86 .

Standard surround sound

The following modes provide basic surround sound for stereo and multichannel sources.

In case of VSX-1130

% While listening to a source, press SURR (STANDARD SURROUND).

If necessary, press repeatedly to select a listening mode.

! If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically

be selected and shows in the display.

With two channel sources, you can select from:

! EXT.STEREO – Gives multichannel sound to a stereo source, using all of your speakers

! Dolby Surround – Dolby Surround is played with a maximum of 7.1 ch including top-middle and surround

back using up-mix technology that can expand sound to speakers arranged in three-dimensions, in lieu of the

conventional Pro Logic II, Pro Logix IIx, and Pro Logic IIz.

! Neo:6 CINEMA – Up to 7.1 channel sound (surround back or front wide), especially suited to movie sources

! Neo:6 MUSIC – Up to 7.1 channel sound (surround back or front wide), especially suited to music sources

! STEREO – The audio is heard with your sound settings and you can still use the audio options.

With multichannel sources, if you have connected surround back, top middle, front wide speakers, you can select

(according to format):

! EXT.STEREO – See above

! Dolby Surround – See above

! STEREO – See above

! DTS Neo:6 – Allows you to hear 6.1 channel playback with DTS encoded sources

! DTS-ES Matrix or DTS-ES Discrete – Allows you to hear 6.1 channel playback with DTS-ES encoded sources

! Straight Decode – Plays back without the effects above.

Notes

! When listening to 2-channel sources in Neo:6 Cinema or Neo:6 Music mode, you can also adjust the center

image effect (see Setting the Audio options on page 86 ).

! When listening through headphones, you can select STEREO mode only.

! When Dolby Surround is selected, C.SPREAD can be adjusted (page 86 ).

! When Dolby Surround is selected, audio is not output from the front wide speaker and surround back speaker

when it is the only one connected (set).

! When Neo:6 CINEMA or Neo:6 MUSIC is selected, audio is not output from the top middle speaker.

In case of VSX-830

% While listening to a source, press SURR (STANDARD SURROUND).

If necessary, press repeatedly to select a listening mode.

! If the source is Dolby Digital, DTS, or Dolby Surround encoded, the proper decoding format will automatically

be selected and shows in the display.

With two channel sources, you can select from:

! EXT.STEREO – Gives multichannel sound to a stereo source, using all of your speakers

! Pro Logic II MOVIE – Up to 5.1 channel sound, especially suited to movie sources

Pro Logic II MUSIC – Up to 5.1 channel sound, especially suited to music sources

Pro Logic II GAME – Up to 5.1 channel sound, especially suited to video games

PRO LOGIC – 4.1 channel surround sound (sound from the surround speakers is mono)

! Neo:6 CINEMA – Up to 5.1 channel sound, especially suited to movie sources

! Neo:6 MUSIC – Up to 5.1 channel sound, especially suited to music sources

! STEREO – The audio is heard with your sound settings and you can still use the audio options.

With multichannel sources, if you have connected surround speakers, you can select (according to format):

! EXT.STEREO – See above

! DTS-ES Matrix or DTS-ES Discrete – Allows you to hear 5.1 channel playback with DTS-ES encoded sources

! DTS Neo:6 – Allows you to hear 5.1 channel playback with DTS encoded sources

! Neo:6 – Allows you to hear 5.1 channel playback

! STEREO – See above

! Straight Decode – Plays back without the effects above.

Notes

! When listening to 2-channel sources in Dolby Pro Logic II Music mode, there are three further parameters you

can adjust: C.WIDTH,DIMENSION and PANORAMA. See Setting the Audio options on page 86 to adjust

them.

! When listening to 2-channel sources in Neo:6 Cinema or Neo:6 Music mode, you can also adjust the center

image effect (see Setting the Audio options on page 86 ).

! When listening through headphones, you can select STEREO mode only.

unable to get sound out of the rear speakers, can you help please Submitted on 9-4-2021 at 12:43
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-830 K in the language / languages: English as an attachment in your email.

The manual is 20,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-830 K

Pioneer VSX-830 K User Manual - German - 146 pages

Pioneer VSX-830 K User Manual - Dutch - 146 pages

Pioneer VSX-830 K User Manual - French - 145 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-830 K Manual

Product: