491882

Pioneer VSX-827-K Manual

4
Zoom out
Zoom in
Previous page
1/44
Next page
4
Initial Setup
Before you start
1
Put the batteries in the remote control.
The batteries included with the unit are to check initial
operations; they may not last over a long period. We
recommend using alkaline batteries that have a longer life.
2
Switch on the receiver and your TV.
INPUT SELECT
SOURCESLEEP
TV
CONTROL
INPUT
RECEIVER
RECEIVER
3
Switch the TV input so that it connects to the
receiver.
4
Turn the subwoofer on and turn up the
volume.
CAUTION
• Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near a
heater. This can cause batteries to leak, overheat, explode
or catch fire. It can also reduce the life or performance of
batteries.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
institution’s rules that apply in your country/area.
Canceling the demo display
The display on the front panel shows various information (demo
displays) when the receiver is not operating.
You can turn off the demo display.
“The FL Demo Mode
menu” on page 31 (VSX-422)/ page 52 (VSX-827/VSX-527)
• The demo mode is canceled automatically when the Auto
MCACC setup is performed (see below).
Automatically setting up for
surround sound (MCACC)
The Auto Multi-Channel Acoustic Calibration (MCACC) setup
uses the supplied setup microphone to measure and analyze
the test tone that is outputted by the speakers. This setup
enables automatic high precision measuring and settings;
utilizing it will create an optimum user listening environment.
Important
• Measure in a quiet environment.
• If you have a tripod, use it to place the microphone so
that it’s about ear level at your normal listening position.
Otherwise, place the microphone at ear level using a table
or a chair.
• Accurate measurements may not be possible if there are
obstacles between the speakers and the listening position
(microphone).
• When measuring, step away from the listening position,
and operate using the remote control from the external
side of all the speakers.
• VSX-827/VSX-527 only: Before using the Auto MCACC
setup, the
NETRADIO
,
M.SERVER
,
FAVORITE
,
iPod/USB
or
ADAPTER
input should not be selected as an input
source.
1
Connect the supplied setup microphone.
MCACC
SETUP
MIC
CONTROL ON
/
OFF
2
Press
RECEIVER
on the remote control, then
press the HOME MENU button.
The Home Menu appears on your TV.
3
Select ’Auto MCACC’ from the Home Menu,
then press ENTER.
Automatic measuring will start.
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4
. Pre Out Setting
5
. HDMI Setup
6
. Auto Power Down
7
. Network Standby
8
. FL Demo Mode
1
. Auto MCACC
Now Analyzing
Surround Analyzing
Speaker System
Speaker Distance
Channel Level
Acoustic Cal EQ
Return
• Measuring will take about 3 to 12 minutes.
4
Follow the instructions on-screen.
• Automatic setting is complete when the Home Menu
screen appears.
5
Make sure the setup microphone is
disconnected.
VSX-827/VSX-527 only: Attach the front cover as shown in
the following illustration.
MCACC
SETUP
MIC
VIDEO
iPod
iPhone
iPad
USB
1
2
Canceling the Auto Power Down
When this receiver is not used over a period of several hours, it
will power down automatically. The automatic power-off timer
is set to six hours under factory settings, and the timing can
be changed or the power-off function switched off altogether.
“The Auto Power Down menu” on page 31 (VSX-422)/ page
52 (VSX-827/VSX-527)
Tripod
Microphone
VSX-827/VSX-527
VSX-422
VSX-527
VSX-827_SYXE_QSG_book.indb 4VSX-827_SYXE_QSG_book.indb 4 2012/03/02 10:58:582012/03/02 10:58:58
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-827-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-827-K in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 15,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-827-K

Pioneer VSX-827-K User Manual - English - 68 pages

Pioneer VSX-827-K User Manual - German - 68 pages

Pioneer VSX-827-K User Manual - Dutch - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info