574181
31
Zoom out
Zoom in
Previous page
1/68
Next page
Listening to your system
06
31
En
English
Français
Deutsch
Nederlands
Italiano
Español
Using surround back channel
processing
Default setting:
SB ON
You can have the receiver automatically use 6.1
decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES), or you
can choose to always use 6.1 decoding (for
example, with 5.1 encoded material). With 5.1
encoded sources, a surround back channel
will be generated, but the material may sound
better in the 5.1 format for which it was origi-
nally encoded (in which case, you can simply
switch surround back processing off).
1
The table below indicates when you will hear
the surround back channel (
ì
=Sound plays
through surround back speaker(s)).
Press
SB ch
(
SB ch PROCESSING
) to select
a surround back channel option.
Each press cycles through the following:
SB ON
– 6.1 decoding is always used (for
example, a surround back channel will be
generated for 5.1 encoded material)
SB AUTO
– Automatically switches to 6.1
decoding for 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)
SB OFF
– Maximum 5.1 playback
Using Virtual Surround Back (VSB)
When you’re not using surround back
speakers, selecting this mode allows you to
hear a virtual surround back channel through
your surround speakers. You can choose to
listen to sources with no surround back
channel information, or if the material sounds
better in the format (for example, 5.1) for which
it was originally encoded, you can have the
receiver only apply this effect to 6.1 encoded
sources like Dolby Digital EX or DTS-ES.
2
The table indicates when you will hear the
virtual surround back channel (
ì
=Sound
plays through surround speaker(s)).
Press
SB ch
(
SB ch PROCESSING
) to select
a virtual surround back channel option.
Each press cycles through the following:
VSB ON
– Virtual Surround Back is always
used (for example, on 5.1 encoded
material)
VSB AUTO
– Virtual Surround Back is
automatically applied to 6.1 encoded
sources (for example, Dolby Digital EX or
DTS-ES)
VSB OFF
– Virtual Surround Back mode is
switched off
Note
1 You can’t use the surround back channel with headphones, the
STEREO
/
DIRECT
mode, or if the surround back speaker is
set to
NO
in
Speaker Setting
on page 40. Also, the
Surround back speaker setting
on page 34 must be set to
Normal (SB)
to hear
the surround back channel.
2 You can’t use virtual surround back with headphones, the
STEREO
/
DIRECT
mode, or if the surround speaker is set to
NO
in
Speaker Setting
on page 40 (however, the surround
back
speaker
must
be set to
NO
).
Type of source
SBch
Processing /
Virtual SB
mode
Standard
Advanced
surround
Multichannel
sources
Stereo sources
2
Pro Logic II x
2
Pro Logic
Neo:6
Dolby Digital EX/DTS-ES/
WMA9 Pro encoded
multichannel sources with
6.1ch surround
ON
ì
ì
a
AUTO
ì
ì
a
Dolby Digital/DTS/WMA9 Pro
encoded multichannel
sources
ON
ì
ì
a
AUTO
ì
a
Dolby Digital/DTS/WMA9 Pro
encoded stereo source; other
digital stereo source
ON
ì
ì
a,
b
ì
ì
a
AUTO
ì
c
ìì
a
05_playing_sources.fm 31 ページ 2005年12月14日 水曜日 午後3時12分
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-816-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-816-K in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info