574181
24
Zoom out
Zoom in
Previous page
1/68
Next page
Controls and displays05
24
En
DIGITAL
– Lights when a digital audio
signal is detected.
2
DIGITAL
– Lights when a Dolby Digital
encoded signal is detected.
ANALOG
– Lights when an analog signal is
detected.
DTS
– Lights when a source with DTS
encoded audio signals is detected.
2
When the
STANDARD
mode is on, this lights
to indicate decoding of a DTS multichannel
signal.
3
2
DIGITAL
When the
STANDARD
mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital multichannel signal.
4
2
PRO LOGIC II
x
When the (
STANDARD
) Pro Logic II mode of
the receiver is on,
2
PRO LOGIC II
lights to
indicate Pro Logic II decoding.
2
PRO LOGIC
II
x
lights to indicate Pro Logic IIx decoding (see
Listening in surround sound
on page 28).
5 VIR.SB
Lights during Virtual surround back
processing (page 31).
6
DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls for
the most accurate reproduction of a source.
7 AUTO SURR.
Lights when Auto Surround (see
Auto playback
on page 28) or XM Surround (page 53) is on.
8
ATT
Lights when
ANALOG ATT
is used to
attenuate (reduce) the level of the analog input
signal.
9 SLEEP
Lights when the sleep mode is active (see
Remote control
below).
10
Tuner
indicators
Lights when the mono mode is set
using the
MPX
button.
Lights when a stereo FM broadcast is
being received in auto stereo mode.
Lights when a broadcast is being
received.
11 Speaker indicators
Lights to indicate the current speaker system,
A
and/or
B
(page 54).
12 Character display
13
Neo:6
When the (
STANDARD
) Neo:6 mode of the
receiver is on, this lights to indicate Neo:6
processing.
14
ADV.SURR.
(Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
15 WMA9 Pro
Lights to indicate decoding of a WMA9 Pro
signal.
16
MIDNIGHT
Lights during Midnight listening (page 32).
17 D.E.
Lights when Dialog Enhancement (
DIALOG
E)
is switched on (page 32).
18
LOUDNESS
Lights during Loudness listening (page 32).
19 EX
Lights when a Dolby Digital Surround EX
encoded signal is detected.
20 Master volume level
Shows the overall volume level.
21 MCACC channel EQ / Sound Retriever
indicators
These indicators show the EQ balance for each
channel in Checking your Acoustic Calibration
EQ settings on page 39. Also, L and R light
when the Sound Retriever is active (page 32).
VSX_816.book.fm 24 ページ 2005年12月8日 木曜日 午後6時54分
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-816-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-816-K in the language / languages: English as an attachment in your email.

The manual is 1,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info