Manual Pioneer VSX-529 (page 60 of 66) (English)

611802

Zoom out

Zoom in

1/66

Additional information

 Cannot access Windows Media Player 11 or Windows

Media Player 12.

 In case of Windows Media Player 11: You are currently logged

onto the domain through your PC with Windows XP or

Windows Vista installed. Instead of logging onto the domain,

log onto the local machine (page 42).

 In case of Windows Media Player 12: You are currently logged

onto the domain through your PC with Windows 7 or 8

installed. Instead of logging onto the domain, log onto the local

machine (page 42).

 Cannot listen to Internet radio stations.

 The firewall settings for components on the network are

currently in operation. Check the firewall settings for

components on the network.

 You are currently disconnected from the Internet. Check the

connection settings for components on the network, and

consult with your network service provider if necessary

(page 44).

 The broadcasts from an Internet radio station are stopped or

interrupted. There are cases where you cannot listen to some

Internet radio stations even when they are listed in the list of

Internet radio stations on this receiver (page 43).

 The NETWORK function cannot be operated with the

buttons on the remote control.

 The remote control is not currently set to the NETWORK mode.

Press

NET

to set the remote control to the NETWORK mode

(page 48).

 This unit cannot be selected from the Spotify application.

 An Internet connection is required for both the mobile digital

device and this unit.

 Connect the mobile digital device by Wi-Fi to the wireless LAN

router of the same network as the one to which this unit is

connected.

 A Spotify Premium account (for a charge) must be registered

on the Spotify application.

 When this unit is in standby, it cannot be selected from the

Spotify application.

 The sound of the Spotify audio stream is not produced.

 Check whether this unit is selected on the Spotify application.

 Check that contents are playing on the Spotify application.

 If the above does not solve the problem, turn this unit’s power

off then back on.

 This unit’s volume does not increase when the volume

slider in the Spotify application is raised.

 On some models, there is an upper limit to the volume to

prevent the volume from being too high accidentally. To raise

the volume higher in this case, do so by operating the remote

control. When using an application such as iControlAV, the

volume can also be increased from the application.

 Playback continues on this unit when the Spotify

application is quit.

 The Spotify audio stream continues from this unit, even when

the Spotify application is quit. To operate again, relaunch the

Spotify application.

Troubleshooting of wireless LAN

 WLAN ERR shows in the display.

 There might be an irregularity with the WLAN adaptor

connected to the DC OUTPUT for WIRELESS LAN on the rear

panel.

 If WLAN ERR shows in the display when Network Standby is

ON, please pull out the AC power cord. When the AC power

cord is reconnected after 10 seconds, the WLAN ERR will be

canceled.

 Network cannot be accessed via wireless LAN.

 Wireless LAN converter’s power is not on (Wireless LAN

converter’s “Power”, “WPS” and “Wireless” indicators are not

all lit). Check that the USB cable connecting the wireless LAN

converter to the receiver’s DC OUTPUT for WIRELESS LAN

terminal is properly connected.

 The LAN cable is not firmly connected. Firmly connect the LAN

cable (page 20).

 Wireless LAN converter and base unit (wireless LAN router,

etc.) are too far apart or there is an obstacle between them.

Improve the wireless LAN environment by moving the wireless

LAN converter and base unit closer together, etc.

 There is a microwave oven or other device generating

electromagnetic waves near the wireless LAN environment.

Use the system in a place away from microwave ovens or

others device generating electromagnetic waves.

Avoid using devices generating electromagnetic waves as

much as possible when using the system with the wireless

LAN.

 Wireless LAN connections cannot be established between the

wireless LAN converter and base unit (wireless LAN router,

etc.).

With the wireless LAN converter connected to the receiver,

turn the receiver’s power off, unplug the power cord from the

power outlet, then plug the power cord back in and turn the

receiver’s power on.

The wireless LAN converter must be set in order to establish

wireless LAN connections. For details, refer to the operating

instructions of the wireless LAN converter.

 The wireless LAN converter is properly connected to the

receiver and the wireless LAN converter’s indicators are lit, but

the wireless LAN converter cannot be set from the receiver (the

settings screen cannot be displayed).

If Network Modes in the receiver’s Network Settings is set

to STATIC and the IP address has been set manually, the IP

address set in the wireless LAN converter may not match. In

the receivers Network Settings, set Network Modes to

DHCP. After the setting is completed, turn the receiver’s power

off. Next, turn the receiver’s power back on and check whether

the wireless LAN converter’s settings can be displayed with the

receiver.

If the settings can be displayed, change the IP address settings

of the receiver and wireless LAN converter as necessary.

 The IP address settings of the receiver and wireless LAN

converter do not match the settings of the wireless LAN router,

etc.

Check the IP address settings of the receiver and wireless LAN

converter (including the Network Modes).

If the receiver’s Network Modes is DHCP, turn the receiver’s

power off, then turn the power back on.

Check that the IP addresses of the receiver and wireless LAN

converter match the settings of the wireless LAN router, etc. If

the receiver’s Network Modes is STATIC, set an IP address

matching the network of the base unit (wireless LAN router,

etc.).

For example, if the wireless LAN router’s IP address is

“192.168.1.1”, set the receiver’s IP address to “192.168.1.XXX”

(*1), the subnet mask to “255.255.255.0”, the gateway and DNS

to “192.168.1.1”.

Next, set the wireless LAN converter’s IP address to

“192.168.1.249” (*2).

(*1) Set the “XXX” in “192.168.1.XXX” to a number between 2

and 248 that is not assigned to other devices.

(*2) Set the “249” in “192.168.1.249” to a number between 2

and 249 that is not assigned to other devices.

 Try making the wireless LAN converter’s advanced settings.

The wireless LAN converter can be connected to a computer to

make the advanced wireless LAN settings. For details, see the

CD-ROM included for the wireless LAN converter. Check the

settings of the wireless LAN router, etc., then change the

settings of the wireless LAN converter.

Note, however, that making the advanced wireless LAN

settings will not necessarily improve the wireless LAN

environment. Be careful when changing the settings.

 The access point is set to conceal the SSID. In this case, the

SSID may not be displayed on the access point list screen. If

dont know what im doing im 72 and havent a skooby what im doing cant get any sound from speakers Submitted on 1-10-2022 at 13:46
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-529 in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-529

Pioneer VSX-529 Quick start guide - English, German - 48 pages

Pioneer VSX-529 User Manual - German - 67 pages

Pioneer VSX-529 Quick start guide - Dutch - 48 pages

Pioneer VSX-529 User Manual - Dutch - 67 pages

Pioneer VSX-529 Quick start guide - French - 48 pages

Pioneer VSX-529 User Manual - French - 67 pages

Pioneer VSX-529 Quick start guide - Italian, Spanish - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-529 Manual

Product: