611802
54
Zoom out
Zoom in
Previous page
1/66
Next page
Home Menu
7
7
54
4
58
9
6
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
Tip
You can change the channel levels at any time by press
CH
SEL
and
CH LEVEL +/–
on the remote control. You can also
press
RECEIVER
, then press
CH SEL
and use
/
to select
the channel, and then use
/
to adjust the channel
levels.
Speaker Distance
For good sound depth and separation from your system, you
need to specify the distance of your speakers from the
listening position. The receiver can then add the proper delay
needed for effective surround sound.
1
Select ‘Manual SP Setup’ from the Home Menu.
2
Select ‘Speaker Distance’ from the Manual SP Setup
menu.
3
Adjust the distance of each speaker using
/
.
You can adjust the distance of each speaker in 0.03 m
increments.
4
When you’re finished, press
RETURN
.
You return to the Manual SP Setup menu.
The Input Assign menu
Assigns input function for analog audio input terminal.
For the assignment of the digital signal inputs, see
Selecting the audio input signal
on page 26.
Analog Input
ANALOG IN1 audio input terminal is assigned to CD under
factory settings, but this can be changed to TV input.
1
Select ‘Input Assign’ from the Home Menu.
2
Select ‘Analog Input’ from the Input Assign menu.
3
Select the desired input option for the ANALOG IN1
audio input terminal.
4
When you’re finished, press
RETURN
.
You return to the Input Assign menu.
Note
When playing analog input audio, switch to the CD or TV
input menu, press
RECEIVER
and press
SIGNAL SEL
several times to choose A (Analog). (see Selecting the audio
input signal on page 26)
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
and no audio signal).
Default setting: 15M
1
Select ‘Auto Power Down’ from the Home Menu.
2
Specify the amount of time to allow before the power
is turned off (when there has been no operation).
Select 15 minutes (default setting) or 30 minutes, 60
minutes or OFF.
Important
Auto power down will occur if the HDMI AUDIO
PARAMETER is set to THRU and there is no operation.
Even if images are being output, if the input volume level is
exceptionally low, it will automatically turn OFF.
Depending on the connected device, the static caused by
the device may prevent the auto power down function from
activating.
If the input volume level is exceptionally low, in some cases
the auto power down function may be activated.
During photo viewer playback, continuing playback without
performing any control operations will activate auto power
down.
3
When you’re finished, press
RETURN
.
You return to the Home Menu.
2
. Manual SP Setup
Return
a
. Speaker Setting
b
. X.Over
c
. Channel Level
d
. Speaker Distance
2d
. Speaker Distance
Front L
Center
Front R
Surround R
Surround L
Subwoofer
Return
[ 3 m ]
[ 3 m ]
[ 3 m ]
[ 3 m ]
[ 3 m ]
3 m
3
. Input Assign
Return
a
. Analog Input
3a
. Analog Input
Return
Analog CD
Home Menu
1
. Auto MCACC
2
. Manual SP Setup
3
. Input Assign
4. Auto Power Down
5. HDMI Setup
6. Network Standby
7. MHL Setup
8. OSD Setup
4
. Auto Power Down
Return
Auto Power Down
15M
54


Need help? Post your question in this forum.

Forumrules
1

Forum

pioneer-vsx-529

Reset search

  • dont know what im doing im 72 and havent a skooby what im doing cant get any sound from speakers Submitted on 1-10-2022 at 13:46

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-529 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-529 in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-529

Pioneer VSX-529 Quick start guide - English, German - 48 pages

Pioneer VSX-529 User Manual - German - 67 pages

Pioneer VSX-529 Quick start guide - Dutch - 48 pages

Pioneer VSX-529 User Manual - Dutch - 67 pages

Pioneer VSX-529 Quick start guide - French - 48 pages

Pioneer VSX-529 User Manual - French - 67 pages

Pioneer VSX-529 Quick start guide - Italian, Spanish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info