455189
41
Zoom out
Zoom in
Previous page
1/168
Next page
The System Setup menu 06
41
En
English
Français
Español
Crossover network
•Default setting: 100Hz
This setting decides the cutoff between bass
sounds playing back from the speakers
selected as LARGE, or the subwoofer, and bass
sounds playing back from those selected as
SMALL.
1
It also decides where the cutoff will
be for bass sounds in the LFE channel.
1 Select ‘X.OVER’ from the SP SETUP menu.
2Use
/
to choose the frequency cutoff
point.
Frequencies below the cutoff point will be sent
to the subwoofer (or LARGE speakers).
Channel level
Using these settings, you can adjust the overall
balance of your speaker system.
1 Select ‘CH LEVEL’ from the SP SETUP
menu.
2Use
/
to select a setup option.
T. TONE M – Move the test tone manually
from speaker to speaker and adjust
individual channel levels.
T. TONE A – Adjust channel levels as the
test tone moves from speaker to speaker
automatically.
3 Confirm your selected setup option.
The test tones will start after you press ENTER.
2
4 Adjust the level of each channel using
/.
If you selected T. TONE M, use / to switch
speakers.
The T. TONE A setup outputs test tones in the
following order (depends on speaker settings).
When the surround back speakers are
connected:
L
C
R
SR
SBR
SBL
SL
SW
When the front height speakers are connected:
L
FHL
C
FHR
R
SR
SL
SW
Adjust the level of each speaker as the test
tone is emitted.
3
Tip
You can change the channel levels at any
time by press , then press CH
SELECT and LEV +/– on the remote
control. You can also press CH SELECT
and use / to select the channel, and
then use / to adjust the channel
levels.
Speaker distance
For good sound depth and separation from
your system, you need to specify the distance
of your speakers from the listening position.
The receiver can then add the proper delay
needed for effective surround sound.
1 Select ‘SP DISTN.’ from the SP SETUP
menu.
2Use
/
to choose the speaker that you
want then set the distance.
Use / to adjust the distance of each
speaker (in 0.1 m increments).
Note
1 For more on selecting the speaker sizes, see Speaker setting on page 40.
2 After the volume increases to the reference level, test tones will be output.
3 • If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level
of each speaker to 75 dB SPL (C-weighting/slow reading).
• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.
RECEIVER
VSX-520_SYXCN_En.book 41 ページ 2010年4月12日 月曜日 午後7時13分
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-520-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-520-K in the language / languages: English, French as an attachment in your email.

The manual is 16,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-520-K

Pioneer VSX-520-K User Manual - German, Dutch, Italian - 228 pages

Pioneer VSX-520-K User Manual - Portuguese - 36 pages

Pioneer VSX-520-K User Manual - Swedish - 104 pages

Pioneer VSX-520-K User Manual - Spanish - 228 pages

Pioneer VSX-520-K User Manual - Norwegian, Finnish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info