574089
46
Zoom out
Zoom in
Previous page
1/63
Next page
The System Setup menu06
46
En
If you didn’t make component video
connections according to the defaults above,
you must assign the numbered input to the
component you’ve connected (or else you may
see the video signal of a different component).
For more on this, see
Using the component
video jacks
on page 16.
1 Select COMP. IN from the IN ASSIG. menu.
2 Use
/
to select the number of the
component video input to which you’ve
connected your video component.
The numbers match the numbers beside the
inputs on the back of the receiver.
3 Select the component that corresponds
with the one you connected to that input.
Use the
/
buttons and
ENTER
to select
DVD
,
TV
,
DVR
or
OFF
.
Make sure you have connected the audio
from the component to the corresponding
inputs on the rear of the receiver.
If you connect any source component to
the receiver using a component video
input, you should also have your TV
connected to this receiver’s
COMPONENT
VIDEO MONITOR OUT
jacks.
The Other setup menu
The Other menu is where you can make
customized settings to reflect how you are
using the receiver.
1 Select OTHER from the System Setup
menu.
2 Use
/
to select the setting you want to
adjust then press
ENTER
.
If you are doing this for the first time, you may
want to adjust these settings in order:
DRC
– Specify the amount of dynamic
range adjustment to Dolby Digital or DTS
soundtracks (see
Dynamic Range Control
Setup
below).
DUALMONO
– Isolate one channel when
listening to discs with dual mono encoding
(see
Dual Mono Setup
below).
LFE ATT
– Set the attenuator level for the
LFE channel (
LFE Attenuator Setup
below).
3 Use
/
to make the adjustments
necessary for each setting, pressing RETURN
to confirm after each screen.
Dynamic Range Control Setup
Default setting:
OFF
Specifies the amount of dynamic range
adjustment to Dolby Digital or DTS
soundtracks:
DRC OFF
– No dynamic range adjustment
(use when listening at higher volume).
DRC MAX
– Dynamic range is reduced
(loud sounds are reduced in volume while
quieter sounds are increased).
DRC MID
– Mid setting.
Dual Mono Setup
Default setting:
CH1
Specifies how dual mono encoded Dolby
Digital soundtracks should be played:
1
CH1
– Only channel 1 is played
CH2
– Only channel 2 is played
CH1 CH2
– Both channels are played
through the front speakers
LFE Attenuator Setup
Default setting:
ATT 0 dB
Set the LFE attenuator as necessary to prevent
ultra-low bass tones (included with some
Dolby Digital and DTS audio sources) from
distorting the sound from the speakers:
LFEATT 0
– No limiting (recommended
setting)
LFEATT 10
– 10 dB of limiting
LFEATT **
– No sound from LFE channel
Note
1 This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.
VSX517_817.fm 46 ページ 2007年2月22日 木曜日 午後8時11分
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-517-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-517-K in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-517-K

Pioneer VSX-517-K User Manual - English, French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info