Manual Pioneer VSX-517-K (page 42 of 63) (English)

574089

Zoom out

Zoom in

1/63

The System Setup menu06

1 Select ‘

EQ A. SET

’ from the Manual

MCACC setup menu.

• Make sure the microphone is connected.

• If you’re using a subwoofer, it is

automatically detected every time you

switch on the system. Make sure it is on

and the volume is at the middle position.

• See

Other problems during Auto MCACC

page 11 for notes regarding high

background noise levels and other possible

interference.

2 Wait for the EQ Auto Setup to finish.

As the receiver outputs test tones, the

frequency balance is adjusted automatically

for the following settings:

•

A. CH

–

All Channel Adjust

is a ‘flat’ setting

where all the speakers are set individually

so no special weighting is given to any one

channel.

•

F.ALG

–

Front Align Adjust

balances the

overall sound so that all speakers are set in

accordance with the front speaker settings

(no equalization is applied to the front left

and right channels).

You will return to the Acoustic Cal EQ setup

menu after the Acoustic Calibration

Equalization is set.

Copying your Acoustic Calibration EQ

settings

If you want to manually adjust the Acoustic

Calibration EQ (see

Setting the Acoustic

Calibration EQ manually

below), we

recommend copying the

A. CH

or the

F.ALG

settings from the

EQ A. SET

setup above (or

from

Automatically setting up for surround

sound (MCACC)

on page 10) to one of the

custom (

) settings. Instead of just a flat

EQ curve, this will give you a reference point

from which to start.

1 Select ‘EQ COPY’ from the Manual MCACC

setup menu.

2 Use

/

to select C1 or C2 then use the

/

buttons to select the setting you want

to copy.

• You can also copy from one custom setting

to another. For more on the

A. CH

and

F.ALG

settings, see

Setting the Acoustic

Calibration EQ automatically

above.

3 Use

/

to select ‘COPY? YES’ to copy

and confirm.

You can also use

/

to select

COPY? NO

cancel.

Setting the Acoustic Calibration EQ

manually

Before manually adjusting the Acoustic

Calibration EQ, we recommend copying the

or the

F.ALG

settings from the auto setup

above (or from

Automatically setting up for

surround sound (MCACC)

on page 10) to one of

the custom settings. Instead of just a flat EQ

curve, this will give you a reference point from

which to start (see

Copying your Acoustic

Calibration EQ settings

above for how to do

this).

1 Select ‘

C1 ADJ

’ or ‘

C2 ADJ

’ from the

Manual MCACC setup menu.

2 Use

/

and

ENTER

to select which

method you want to use to adjust the overall

frequency balance.

It is best to choose whichever one you copied

to the custom setting in

Copying your Acoustic

Calibration EQ settings

above.

•

A. CH ADJ

– All the speakers can be set

independently so no special weighting is

given to any one channel. When adjusting,

test tones will sound for each individual

channel.

•

F.ALG ADJ

– Speakers are set in

accordance with the front speaker

settings. The sound of the test tone will

alternate between the left front (reference)

speaker and the target speaker.

VSX517_817.fm 42 ページ２００７年２月２２日　木曜日　午後８時１１分

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-517-K in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-517-K

Pioneer VSX-517-K User Manual - English, French - 78 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-517-K Manual

Product: