574089
34
Zoom out
Zoom in
Previous page
1/63
Next page
Listening to your system05
34
En
Using Stream Direct
Use the Stream Direct modes when you want
to hear the truest possible reproduction of a
source. All unnecessary signal processing is
bypassed.
Above: VSX-517 (left) and VSX-817 (right)
While listening to a source, press AUTO
SURR to select Stream Direct mode.
AUTOSURR.
– See
Auto playback
on
page 31.
DIRECT
– Sources are heard according to
the settings made in the Surround Setup
(speaker setting, channel level, speaker
distance), as well as with dual mono, Center
Width, Dimension and Panorama settings.
You will hear sources according to the
number of channels in the signal. For analog
sources, only Channel Level can be set. All
other digital processing can not be set.
Listening with Acoustic
Calibration EQ
VSX-817 model only
Default setting:
OFF
/
ALL CH
(after the
Auto MCACC Setup or EQ Auto Setting)
You can listen to sources using the Acoustic
Calibration Equalization set in
Automatically
setting up for surround sound (MCACC)
on
page 10 or
Acoustic Calibration EQ
on page 41.
Refer to these pages for more on Acoustic
Calibration Equalization.
While listening to a source, press (SHIFT +)
ACOUSTIC EQ.
Press repeatedly to select between:
ALL CH
– No special weighting is given to
any one channel.
F. ALIGN
– All speakers are heard in
accordance with the front speaker settings.
CUSTOM 1/2
– Custom settings
EQ OFF
– Switches Acoustic Calibration
EQ off.
The MCACC indicator on the front panel lights
when Acoustic Calibration EQ is active.
1
Choosing the input signal
Default setting:
AUTO
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
2
Press
SIGNAL SELECT
(front panel) to
select the input signal corresponding to the
source component.
Each press cycles through the following:
AUTO
– This automatically switches to
DIGITAL
if a digital source is detected,
otherwise it remains on
ANALOG
.
ANALOG
– Selects the analog inputs.
DIGITAL
– Selects the digital input.
When set to
DIGITAL
or
AUTO
,
2
DIGITAL
lights when a Dolby Digital signal is input, and
DTS
lights when a DTS signal is input.
TOP MENU
CD-R
AMFMCD
MENU
AUTO SURR STANDARD
S.RETRIEVER
ADV.SURR
STEREO/
F.S.SURR
CD
FM AM
RECEIVER
CD-R/TAPE
STANDARD
PHASE DIALOG
ADV.SURR
STEREO/
F.S.SURR
SOUND
RETRIEVER
ACOUSTIC
EQ
AUTO SURR
PHASE DIALOG
EFFECT
SOUND
RETRIEVER
ACOUSTIC
EQ
Note
1 You can’t use Acoustic Calibration EQ with
DVD 5.1ch
, WMA9 Pro and it has no effect with headphones.
2• This receiver can only playback Dolby Digital, PCM (32 kHz to 96 kHz), DTS and WMA9 Pro digital signal formats. With other
digital signal formats, set to
ANALOG
.
• You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make
the proper digital connections (page 13) and set the signal input to
DIGITAL
.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
VSX517_817.fm 34 ページ 2007年2月22日 木曜日 午後8時11分
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-517-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-517-K in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-517-K

Pioneer VSX-517-K User Manual - English, French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info