574089
10
Zoom out
Zoom in
Previous page
1/63
Next page
5 minute guide02
10
En
Automatically setting up for
surround sound (MCACC)
VSX-817 model only
The Auto Multi-Channel Acoustic Calibration
(MCACC) setup measures the acoustic
characteristics of your listening area, taking
into account ambient noise, speaker size and
distance, and tests for both channel delay and
channel level. After you have set up the
microphone provided with your system, the
receiver uses the information from a series of
test tones to optimize the speaker settings and
equalization for your particular room.
Important
The Auto MCACC Setup will overwrite any
existing speaker settings you’ve made.
Make sure the headphones are unplugged.
Caution
The test tones used in the Auto MCACC
Setup are output at high volume.
1 Connect the microphone to the MCACC/
AUDIO IN jack on the front panel.
Make sure there are no obstacles between the
speakers and the microphone.
Push down on the
PUSH OPEN
tab to access
the
MCACC/AUDIO IN
jack.
If you have a tripod, use it to place the
microphone so that it’s about ear level at your
normal listening position. Otherwise, place the
microphone at ear level using a table or a chair.
2 If the receiver is off, press
RECEIVER
to
turn the power on.
3 If you have a subwoofer, turn it on.
4 Press
RECEIVER
on the remote control,
then press the
SETUP
button.
Press
SETUP
again at any time to exit the
System Setup menu.
1
5 Select ‘A. MCACC’ from the System Setup
menu then press
ENTER
.
6
Make sure ‘SB NORM.’ is selected then
press ENTER.
2
Try to be as quiet as possible after pressing
ENTER
. The system outputs a series of test
tones to establish the ambient noise level.
If the noise level is too high,
NOISY!
blinks in
the display for five seconds. To exit and check
the noise levels again, press
SETUP
(see the
notes about ambient noise below) or press
ENTER
when you’re prompted to
RETRY?
.
Do not adjust the volume during the test
tones. This may result in incorrect speaker
settings.
The system now checks the microphone and
your speaker setup.
SOURCE
MULTI CONTROL
RECEIVER
INPUT SELECT
DVD/LD
TV/SAT
CD
DVR/VCR
FM AM
RECEIVER
TV CTRL
CD-R/TAPE
F. AUDIO
STANDARD
ADV.SURR
STEREO/
F.S.SURR
AUTO SURR
RECEIVER CONTROL
SUBTITLE
AUDIO
REC
MENU
TOP MENU
GUIDE
T.EDIT
RETURN
ST
TUNE
ST
TUNE
ENTER
SETUP
ONE TOUCH
COPY
CH
+
CH
-
Note
1 The receiver will automatically exit the current menu after three minutes of inactivity. If you cancel the Auto MCACC Setup at
any time, the receiver automatically exits and no settings will be made.
2• If you are planning on bi-amping your front speakers, or setting up a separate speaker system in another room, read through
Surround back speaker setting
on page 39 and make sure to connect your speakers as necessary before continuing to step 7.
UPDOWN
MASTER
VOLUME
MCACC/
AUDI O IN
VSX517_817.fm 10 ページ 2007年2月22日 木曜日 午後8時11分
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-517-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-517-K in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-517-K

Pioneer VSX-517-K User Manual - English, French - 78 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info