455224
14
Zoom out
Zoom in
Previous page
1/126
Next page
Quick surround sound setup03
14
En
If you see an
ERR
message in the display, there
may be a problem with your mic or the speaker
connections. Turn off the power, and check the
problem indicated by the
ERR
message (see
below), then try the auto surround setup again.
ERR MIC
– Check microphone connection.
ERR Fch
– Check front speaker connections.
ERR Sch
– Check surround speaker
connections.
ERR SBch
– Check surround back speaker
connections.
ERR SW
– Make sure the subwoofer has
been switched on and volume on the
subwoofer is turned up.
6 When you see CHECK OK in the display,
confirm your speaker configuration.
Use
/
(cursor up/down) to check each
speaker in turn.
YES
or
NO
should reflect the
actual speakers connected. If the speaker
configuration displayed isn’t correct, use
/
(cursor left/right) to change the setting.
When you’re finished, go to the next step.
7 Select CHECK OK in the display then press
ENTER
.
The Auto MCACC finishes by checking the
subwoofer level.
If the subwoofer output level is too high/
low,
SW.VOL.DWN
/
SW.VOL.UP
blinks in
the display for five seconds. To exit and
check your subwoofer output level, press
SYSTEM SETUP
or simply press
ENTER
when you’re prompted to
RETRY?
8 The Auto MCACC Setup has finished!
The front panel MCACC indicator lights to
show the surround settings are complete.
The settings made in the Auto MCACC Setup
should give you excellent surround sound from
your system, but it is also possible to adjust
these settings manually using the System
Setup menu (starting on page 44).
1
Optionally, when you see
SKIP?
you can press
/
(cursor left/right) to select one of the
following options then
/
(cursor up/down)
to check the settings:
CHK SP
– Check the size and number of
speakers you’ve connected (see page 48
for more on this)
CHK DIST.
– Check the distance of your
speakers from the listening position (see
page 50 for more on this)
CHK LEVEL
– Check the overall balance of
your speaker system (see page 50 for more
on this)
CHK EQ
– Select either
ALL CH
or
F ALIGN
to check the adjustments to the frequency
balance of your speaker system based on
the acoustic characteristics of your room
(see page 46 for more on this)
9 When you’re finished, select
‘SKIP?’
to go
back to the System Setup menu.
Remember to disconnect the microphone
after completing the Auto MCACC Setup.
Other problems during Auto MCACC
If the room environment is not optimal for the
Auto MCACC Setup (too much background
noise, echo off the walls, obstacles blocking
the speakers from the microphone) the final
settings may be incorrect. Check for household
appliances (air conditioner, fridge, fan, etc.),
that may be affecting the environment and
switch them off if necessary.
2
If there are any
instructions showing in the front panel display,
please follow them.
Note
1• Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12cm will end up
with different size settings. You can correct the setting manually using the
Speaker setting
on page 48.
• The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be
accurate (taking delay and room characteristics into account) and generally does not need to be changed.
2 Some older TVs may interfere with operation of the mic. You may want to switch off your TV during the Auto MCACC Setup.
VSX_415-515.fm 14 ページ 2005年1月21日 金曜日 午後5時3分
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-515-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-515-K in the language / languages: English, Italian as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-515-K

Pioneer VSX-515-K User Manual - English - 108 pages

Pioneer VSX-515-K User Manual - German - 126 pages

Pioneer VSX-515-K User Manual - Dutch - 126 pages

Pioneer VSX-515-K User Manual - French - 126 pages

Pioneer VSX-515-K User Manual - French - 108 pages

Pioneer VSX-515-K User Manual - Spanish - 126 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info