491887
26
Zoom out
Zoom in
Previous page
1/31
Next page
The System Setup menu
26
En
05
05
X.Over
• Default setting: 100Hz
This setting decides the cutoff between bass sounds playing
back from the speakers selected as LARGE, or the subwoofer,
and bass sounds playing back from those selected as
SMALL. It also decides where the cutoff will be for bass
sounds in the LFE channel.
• For more on selecting the speaker sizes, see Speaker
Setting on page 25.
1Use
/
to select ‘SP SETUP’ from the System Setup
menu, then press ENTER.
2Use
/
to select ‘X.OVER’ from the SP SETUP menu,
then press ENTER.
3Use
/
to select the frequency cutoff point.
Frequencies below the cutoff point will be sent to the
subwoofer (or LARGE speakers).
4 When you’re finished, press RETURN.
You return to the Speaker Setup menu.
Channel Level
Using the channel level settings, you can adjust the overall
balance of your speaker system, an important factor when
setting up a home theater system.
CAUTION
The test tones used in the System Setup are output at
high volume.
1Use
/
to select ‘SP SETUP’ from the System Setup
menu, then press ENTER.
2Use
/
to select ‘CH LEVEL’ from the SP SETUP menu,
then press ENTER.
3Use
/
to select a setup option.
T. TONE M – Move the test tone manually from speaker
to speaker and adjust individual channel levels.
T. TONE A – Adjust channel levels as the test tone moves
from speaker to speaker automatically.
4 Confirm your selected setup option.
The test tones will start after you press ENTER. After the
volume increases to the reference level, test tones will be
output.
5Use
/
to adjust the level of each channel.
If you selected T. TONE M, use / to switch speakers. The
T. TONE A setup outputs test tones in the following order
(depends on speaker settings):
L C R SR SBR SBL SL SW
Adjust the level of each speaker as the test tone is emitted.
Note
If you are using a Sound Pressure Level (SPL) meter, take
the readings from your main listening position and adjust
the level of each speaker to 75 dB SPL (C-weighting/slow
reading).
The subwoofer test tone is output at low volumes. You
may need to adjust the level after testing with an actual
soundtrack.
6 When you’re finished, press RETURN.
You return to the Speaker Setup menu.
Tip
You can change the channel levels at any time by press
, then press CH SELECT and LEV +/– on the
remote control. You can also press CH SELECT and use
/ to select the channel, and then use / to adjust
the channel levels.
Speaker Distance
For good sound depth and separation from your system, you
need to specify the distance of your speakers from the
listening position. The receiver can then add the proper delay
needed for effective surround sound.
1Use
/
to select ‘SP SETUP’ from the System Setup
menu, then press ENTER.
2Use
/
to select ‘SP DISTN’ from the SP SETUP menu,
then press ENTER.
3Use
/
to choose the speaker that you want then set
the distance.
Use / to adjust the distance of each speaker in 0.1 m
increments.
4 When you’re finished, press RETURN.
You return to the Speaker Setup menu.
The Auto Power Down menu
Set to automatically turn off the receiver after a specified time
has passed (when the power has been on with no operation
for several hours.
• Default setting: 6 hours
1Use
/
to select ‘APD’ from the System Setup menu,
then press ENTER.
2 Specify the amount of time to allow before the power
is turned off (when there has been no operation).
•Use / to select 2, 4 or 6 hours, or OFF (if no automatic
shutoff is desired).
3 When you’re finished, press RETURN.
You return to the System Setup menu.
The FL Demo Mode menu
Set whether or not various demos are to be shown on the
front panel display.
• Default setting: ON
1Use
/
to select ‘FL DEMO’ from the System Setup
menu, then press ENTER.
2Use
/
to choose ON or OFF for the demo display.
3 When you’re finished, press RETURN.
You return to the System Setup menu.
RECEIVER
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-322-K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-322-K in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-322-K

Pioneer VSX-322-K Quick start guide - English, German - 32 pages

Pioneer VSX-322-K User Manual - German - 31 pages

Pioneer VSX-322-K Quick start guide - Dutch - 32 pages

Pioneer VSX-322-K User Manual - Dutch - 31 pages

Pioneer VSX-322-K Quick start guide - French - 32 pages

Pioneer VSX-322-K User Manual - French - 31 pages

Pioneer VSX-322-K Quick start guide - Italian, Spanish - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info