Manual Pioneer VSX-321-K-P (page 26 of 64) (English)

574065

Zoom out

Zoom in

1/64

The System Setup menu

1Use

/

to select ‘SP SETUP’ from the System Setup

menu, then press ENTER.

2Use

/

to select ‘X.OVER’ from the SP SETUP menu,

then press ENTER.

3Use

/

to select the frequency cutoff point.

Frequencies below the cutoff point will be sent to the

subwoofer (or LARGE speakers).

4 When you’re finished, press RETURN.

You return to the Speaker Setup menu.

Channel Level

Using the channel level settings, you can adjust the overall

balance of your speaker system, an important factor when

setting up a home theater system.

CAUTION

• The test tones used in the System Setup are output at

high volume.

1Use

/

to select ‘SP SETUP’ from the System Setup

menu, then press ENTER.

2Use

/

to select ‘CH LEVEL’ from the SP SETUP menu,

then press ENTER.

3Use

/

to select a setup option.

• T. TONE M – Move the test tone manually from speaker

to speaker and adjust individual channel levels.

• T. TONE A – Adjust channel levels as the test tone moves

from speaker to speaker automatically.

4 Confirm your selected setup option.

The test tones will start after you press ENTER. After the

volume increases to the reference level, test tones will be

output.

5Use

/

to adjust the level of each channel.

If you selected T. TONE M, use / to switch speakers. The

T. TONE A setup outputs test tones in the following order

(depends on speaker settings):

L  C  R  SR  SBR  SBL  SL  SW

Adjust the level of each speaker as the test tone is emitted.

Note

• If you are using a Sound Pressure Level (SPL) meter, take

the readings from your main listening position and adjust

the level of each speaker to 75 dB SPL (C-weighting/slow

reading).

• The subwoofer test tone is output at low volumes. You

may need to adjust the level after testing with an actual

soundtrack.

6 When you’re finished, press RETURN.

You return to the Speaker Setup menu.

Tip

• You can change the channel levels at any time by press

, then press CH SELECT and LEV +/– on the

remote control. You can also press CH SELECT and use

/ to select the channel, and then use / to adjust

the channel levels.

Speaker Distance

For good sound depth and separation from your system, you

need to specify the distance of your speakers from the

listening position. The receiver can then add the proper delay

needed for effective surround sound.

1Use

/

to select ‘SP SETUP’ from the System Setup

menu, then press ENTER.

2Use

/

to select ‘SP DISTN’ from the SP SETUP menu,

then press ENTER.

3Use

/

to choose the speaker that you want then set

the distance.

Use / to adjust the distance of each speaker in 0.03 m

increments.

4 When you’re finished, press RETURN.

You return to the Speaker Setup menu.

The Auto Power Down menu

Set to automatically turn off the receiver after a specified time

has passed (when the power has been on with no operation

for several hours.

• Default setting: OFF

1Use

/

to select ‘APD’ from the System Setup menu,

then press ENTER.

2 Specify the amount of time to allow before the power

is turned off (when there has been no operation).

•Use / to select 2, 4 or 6 hours, or OFF (if no automatic

shutoff is desired).

3 When you’re finished, press RETURN.

You return to the System Setup menu.

The FL Demo Mode menu

Set whether or not various demos are to be shown on the

front panel display.

• Default setting: ON

1Use

/

to select ‘FL DEMO’ from the System Setup

menu, then press ENTER.

2Use

/

to choose ON or OFF for the demo display.

3 When you’re finished, press RETURN.

You return to the System Setup menu.

RECEIVER

05_system_setup.fm 26 ページ２０１１年９月１日　木曜日　午後８時１６分

Only one hdmi input works
Is there a place I can download a schematic diagram Submitted on 17-12-2019 at 04:45
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-321-K-P in the language / languages: English as an attachment in your email.

The manual is 12,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pioneer VSX-321-K-P

Pioneer VSX-321-K-P User Manual - English, French - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pioneer VSX-321-K-P Manual

Product: