574063
108
Zoom out
Zoom in
Previous page
1/136
Next page
The System Setup and Other Setup menus11
108
En
1 Select ‘
Speaker Distance
’ from the
Manual SP Setup
menu.
2 Adjust the distance of each speaker using
/
.
You can adjust the distance of each speaker in
1/2 inch increments.
3 When you’re finished, press
RETURN
.
You will return to the Manual SP Setup menu.
Tip
For best surround sound, make sure the
surround back speakers are the same
distance from the listening position.
X-Curve
Most soundtracks mixed for cinema sound too
bright when played back in large rooms. The X-
Curve setting acts as a kind of re-equalization
for home theater listening, and restores proper
tonal balance of movie soundtracks.
1
1 Select ‘
X-Curve
’ from the
Manual SP
Setup
menu.
2 Choose the X-Curve setting you want.
Use / to adjust the setting. The X-Curve is
expressed as a downwards slope in decibels
per octave, starting at 2 kHz. The sound
becomes less bright as the slope increases (to
a maximum of –3.0dB/oct). Use the following
guidelines to set the X-Curve according to your
room size:
•If you select OFF, the frequency curve will
be flat and the X-Curve has no effect.
3 When you’re finished, press
RETURN
.
Network Setup menu
Set up the network to listen to Internet radio on
this receiver.
1 Press on the remote control,
then press
HOME MENU
.
A Graphical User Interface (GUI) screen
appears on your TV. Use /// and
ENTER to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
2Select
System Setup
’ from the
Home
Menu
.
3Select
Network Setup
’ from the
System
Setup
menu.
4 Select the setting you want to adjust.
If you are doing this for the first time, you may
want to adjust these settings in order:
IP Address, Proxy – Sets up the IP
address/Proxy of this receiver (see below).
Information – Checks the MAC address of
this receiver (page 109).
IP address/Proxy setting
In case the router connected to the LAN
terminal on this receiver is a broadband router
(with a built-in DHCP server function), simply
turn on the DHCP server function, and you will
not need to set up the network manually. You
must set up the network as described below
only when you have connected this receiver to
a broadband router without a DHCP server
function. Before you set up the network,
consult with your ISP or the network manager
for the required settings. It is advised that you
also refer to the operation manual supplied
with your network component.
2
Note
1 Since the principal is the same, X-Curve isn’t applied when you’re using the Pure direct mode.
Room size (ft
2
)
400
550
650
800
2200
12000
X-Curve
(dB/oct)
–0.5 –1.0 –1.5 –2.0 –2.5 –3.0
2 In case you make changes to the network configuration without the DHCP server function, make the corresponding
changes to the network settings of this receiver.
RECEIVER
VSX-31_30_UC.book 108 ページ 2010年8月25日 水曜日 午前9時28分
108


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-31 in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info