574063
91
Zoom out
Zoom in
Previous page
1/136
Next page
The Advanced MCACC menu 10
91
En
Automatic MCACC (Expert)
If your setup requires more detailed settings
than those provided in Automatically
conducting optimum sound tuning (Auto
MCACC on page 41, you can customize your
setup options below. You can calibrate your
system differently for up to six different MCACC
presets
1
, which are useful if you have different
listening positions depending on the type of
source (for example, watching movies from a
sofa, or playing a video game close to the TV).
2
Important
Make sure the microphone/speakers are
not moved during the Auto MCACC Setup.
Using the Auto MCACC Setup will
overwrite any existing settings for the
MCACC preset you select.
3
The screen saver will automatically appear
after five minutes of inactivity.
CAUTION
The test tones used in the Auto MCACC
Setup are output at high volume.
1 Select ‘
Auto MCACC
’ from the
Advanced
MCACC
menu, then press
ENTER
.
If the Advanced MCACC screen is not
displayed, refer to Making receiver settings from
the Advanced MCACC menu on page 90.
2 Select the parameters you want to set.
Use / to select the item, then use / to
set.
Auto MCACC – The default is ALL
(recommended), but you can limit the
system calibration to only one setting (to
save time) if you want.
4
The available
options are ALL, Keep SP System,
5
Speaker Setting, Channel Level,
Speaker Distance and EQ Pro & S-Wave.
EQ Type (only available when the Auto
MCACC Menu above is EQ Pro & S-Wave)
– This determines how the frequency
balance is adjusted.
Note
1 These are stored in memory and referred to as MEMORY1 to MEMORY6 until you rename them in Data Management
on page 102.
2 You may also want to have separate calibration settings for the same listening position, depending on how you’re
using your system.
3 Except in cases where you are only adjusting one parameter (i.e. channel level) from the Auto MCACC menu (step 2).
4 • When data measurement is taken (after selecting ALL or Keep SP System), the reverb characteristics data (both
before- and after-calibration) that this receiver had been storing will be overwritten. If you want to save the reverb
characteristics data before measuring, connect a USB memory device to this receiver and transfer the data.
• When measurement is taken of data other than SYMMETRY (after selecting ALL or Keep SP System), the data are
not measured after the correction. If you will need to measure after correction data, take the measurement using the
EQ Professional menu in the Manual MCACC setup (page 97).
• The EQ Pro & S-Wave measurement is also taken when Keep SP System or EQ Pro & S-Wave is selected. See
Acoustic Calibration EQ Professional on page 97 for more on this.
• Either effect of Acoustic Calibration EQ Professional and Standing Wave can be switched on and off in the
respective MCACC preset. For details, see Setting the Audio options on page 72.
5The Keep SP System option allows you to calibrate your system while leaving your current speaker setting (page 106)
unchanged.
VSX-31_30_UC.book 91 ページ 2010年8月25日 水曜日 午前9時28分
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pioneer VSX-31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pioneer VSX-31 in the language / languages: English as an attachment in your email.

The manual is 8,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info